• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Monte Allums Boss ODB-3 Tri-Gain mod - changes EVERYTHING

Just finished the ODB-3 Tri Gain mod from Monte Allums. The difference is night and day with sound of the pedal. Pretty happy so far, and that's just going in to the SVX plugin in Pro Tools. Can't wait to get it up to volume through an amp! :)

Anyhow, here's a quick and dirty clip. It's a Ric 4003 in to the modified ODB-3, then in to IK Multimedia SVX on the clean SVT Classic setting (ultra lo switch defeated) in Pro Tools.

The first 8 bars the "balance" and "gain" knobs are at 9:00 on the pedal.

At bar 9, a 4 bar chorus section - balance and gain is at noon.

Then back to 8 bars at 9:00.

The last chorus section, at bar 21, the balance and gain are all the way up. It's a little much.

Also, excuse the sloppy playing ;)

Invalid Link Removed You have to wait a few seconds for the mp3 player to pop up.
 
that sounds pretty solid. no idea what, if anything, the ampeg plug is doing to help, but i could definitely see that being pretty usable. kinda sansampy with a more gritty texture and without the sheen on the top.

I should have done a "clean" version, but I was having too much fun!

The Ampeg model is completely clean. No grit whatsoever. The actual SVX patch is called "ROCK SVT-CL 1". I turned off the Ultra Lo switch.

This modded pedal is also great for guitar. Sounds better than most guitar ODs I've heard, so it could serve double duty for guitar and bass.
 
I modded one of those guys a few years back. I used Brian Wampler's pedal mod guide to reduce the shrillness of the highs & increase bass. It was a simple cap increase & resistor swap, but oh the change!

Idk what the Monte Alums mod actually is, cap & resistor value-wise, only what I've read that it does, but I'd assume the same caps & resistor that I changed are the same here. I didn't upgrade/change the op amps, which I'm sure makes some difference too. Also, I've NEVER had a pedal with a dual chip op amp mod...

What do you feel the impact of the dual IC chips was, if you can single that out?

The different clipping options sounds exciting, to.
 
I modded one of those guys a few years back. I used Brian Wampler's pedal mod guide to reduce the shrillness of the highs & increase bass. It was a simple cap increase & resistor swap, but oh the change!

Idk what the Monte Alums mod actually is, cap & resistor value-wise, only what I've read that it does, but I'd assume the same caps & resistor that I changed are the same here. I didn't upgrade/change the op amps, which I'm sure makes some difference too. Also, I've NEVER had a pedal with a dual chip op amp mod...

What do you feel the impact of the dual IC chips was, if you can single that out?

The different clipping options sounds exciting, to.

To be honest, I'm just good at following directions. He could tell me to solder it to my forehead and I'd probably do it ;) So I'm not sure the impact of the stacked chips, although the pedal is completely improved with his kit. He says in the instructions that you can take out one of the chips to save battery power.
 
Yep, I am going to do this too soon. I just did a monte allums mod on the OD-3 for my guitar and it just smokes other overdrives I've heard.

That ODB-3 clip you did sounds pretty righteous- good sparkly warm grind and lots of note clarity. Thanks for posting that!
 
I have a stock ODB, which I love so much, and I also loved the demo of yours. Is it possible to mod it so it will retain the original shrill and harshness AND having the ability to turn it down until it sounds like the demo? Not really good at electronics, but I figure it would come in a form of a switch where I can simply select the original sound or the modded sound
 
  • Like
Reactions: superblues
Awesome tone. I can't believe how much that mod changes the character of the pedal. Sounds so much more controlled in that sample, very thick and clear at the same time and all of that annoying fuzz is gone. Sounds a lot more Sansamp-ish now, but with mids.
I'd really love to hear another sample with clean sound A/B'd, without the SVX. :)

Now I regret selling mine, I could've tried screwing around with modding it, it sure seems to be damn worth it.