• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

First build thread 'Roberts JB4'

roberthabraken

roberthabraken

Jan 8, 2009
1,999
6
The Netherlands
#1
Hi there, going to start my first build after weeks of reading, drawing and thinking about building my own bass! Very excited about this! I have some wood working experience, but not much (I built RC planes in the past and always liked working with wood) and I am a musician for about 20 years (saxophone / guitar / bass)..

Some specs I have in mind:

- Mahogany body with nice top & laminated center (ash / sucupira e.g.).. semi-hollow /w tone holes, maybe with a transparent red finish
- Indian rosewood fingerboard /w 24 frets, no inlays and almost flat (40" radius or something like that)
- Wengé neck (or maple... not sure)
- 4 Strings
- Ultra Jazz pickups from DiMarzio / passive / only 2 volume controls
- All golden hardware (Gotoh bridge and tuners)

And a photo of the design, paper template and plywood (for the template):

Invalid Link Removed

Still working on the headstock design..

I'll keep you posted!
 
#4
I made some progress today.. it's a slow build, or at least, for now, because I had to clean up a bit and create a decent working space first. Also bought me a new jigsaw, with more power and accuracy. It is capable of handling thicker wood, so maybe I am going to do the rough cut of the body blank with my jigsaw too... saw some band saws, but they cost a little more than I want to spent on tools for now.

So here's some photos of the plywood template. I am happy with the result, but still needed to fill some minor gaps. Next thing is sanding it to a real smooth template, so I'll be on this for another day I guess..

Link Removed

Invalid Link Removed
 
#7
Very nice design - the lower bout reminds me of some of the Schecter designs, which I find very attractive.

I have done a few bass bodies with a jigsaw; it works out fine for me, because I follow it up with a template bit on the router table.

Sound holes for a first build? You're ambitious, aren't you? Just don't get in a hurry, and you'll be okay!
 
#8
ctmullins said:
Very nice design - the lower bout reminds me of some of the Schecter designs, which I find very attractive.

I have done a few bass bodies with a jigsaw; it works out fine for me, because I follow it up with a template bit on the router table.

Sound holes for a first build? You're ambitious, aren't you? Just don't get in a hurry, and you'll be okay!
Click to expand...

Yes, I'm going to follow it up with a template bit on the router anyhow. And for the sound holes.. not sure about that, but I really really like them, so if I have the guts, I'll go for it!

And yes, I am ambitious.. and also a perfectionist :D. Since it is my first build, I am working very very slow and as accurate as possible.. don't want to mess it up :smug:.
 
#10
It is a regular router bit with a 'guide' on top of it. After you cut the body blank roughly, you screw the template on it (at the neck pocket and pickup locations e.g.) and then you route the body. The guide of the template router bit follows the contours of your template and the shape will be transfered on the body.

The only thing you need is a perfect and smooth template..
 
#13
roberthabraken said:
and one more thing: yes, I know there's a lot of Jerzy Drozd in here, but I think that's very cool! It's a combination of his basses, a regular jazz bass and my own style :D.

I'll keep you posted!
Click to expand...

Ther's nothing wrong with a bit of Drozd inspiration, very, very nice basses.

My only observation is that I don't think you need that narrow strip to make the neck pocket on the treble side, it should still be structurally sound if that was removed and the treble side horn blended into the neck
 
#14
roberthabraken said:
What can you do to prevent this? Slow down the speed of movement or lower speed of the bit?
Click to expand...

Im a total beginner with a router, I found a lot of problems but not too many solutions yet :( Next time, I'll just use hand tools to tidy up the outline.

Ideally I'd do a course on routing but Ive not found any venues locally that do them. I did find this tho:

http://uk.youtube.com/watch?v=_JqXjf88mAs

At about 7 minutes in he talks about where tear out is likely. To avoid it, he removes as much material up to the line as possible using other tools, so the router bit only needs to take a very shallow pass at the trouble spots.

I'd like to see how other people solve this problem?
 
#17
Mikey R said:
I did find this tho:

http://uk.youtube.com/watch?v=_JqXjf88mAs

At about 7 minutes in he talks about where tear out is likely. To avoid it, he removes as much material up to the line as possible using other tools, so the router bit only needs to take a very shallow pass at the trouble spots.

I'd like to see how other people solve this problem?
Click to expand...

Thanks! Maybe we should start a thread about it / or there already could be one..
 
#18
vbasscustom said:
nope, that sounds about right, you could go with the grain for all of it, if you started and stopped and moved the router so its always going with the grain
Click to expand...

Good idea, but to do this youd have to flip the workpiece over so that the bit is spinning the other way relative to the workpiece.

So, if you started with a bit with the bearing at the top, when you flip the piece over you'd have to swap it out for one with the bearing at the bottom. Definitely doable!

Cheers! :)
 

Latest posts

Top Bottom
Back