Removing swirl marks

what bass is that and whats the finish?

This swirl remover is pretty expensive, but very good:


[Invalid or Expired Link Removed]

One bottle will last you a few years though. It's good sized.

The Stewmac stuff is pretty good, although it's pretty expensive. Assuming you've got a hard clear finish, I'd recommend Meguiar's Scratch-X. You'll need very little (just like the Stewmac, or any other abrasive polish, for that matter), and you can apply by hand - just be sure to work it in so it breaks down effectively. Otherwise - and this applies to other abrasive polishes as well - you'll leave behind a messy haze and will need to repeat.

Once you've polished the finish and have it looking great, you can apply an automotive wax or sealant. If you're on a Meguiar's fix, their NXT v2.0 is great stuff, and is actually a hybrid product - a wax with polymers for better durability. Two light coats over 48 hours and the dust will wipe off without harming the finish.

lexxmexx said:

One of my basses had been left unplayed in a corner for too long and it is now coated with dust. So I used a duster to dust off most of the dust and used another cloth to wipe it. Here's the disaster, the wiping had created some spiderweb-like swirl marks on the surface like those badly-detailed cars and I am not into relic'ed basses at all.

Can those car scratch removers like Scratch X or Turtlewax fix them? Will such chemicals harm the finishing on the bass?

Click to expand...

I'm gonna guess this bass is black.