I feel lucky to be able to say that after much looking, trying, and playing, this is my new/used bass. Here's the short version.
It’s a 12 year old unlabeled Hungarian flatback, imported 12 years ago by E.M.M.C. Bought and played for about 10 years by Paul Nowinski. Brazilian luthier Paulo Gomes did some work on the bass, including installation of the hatpeg tuners and gluing linen strips on the inside of the ribs, to reduce cracking.
Local luthiery wizard Jed Kriegel got the bass about 1 ½ years ago, with an eye to rebuilding it, from the ground up. Jed essentially used the existing bass as lumber and a basic shape, and, working from the outside in, built a new bass within the outlines.
He took it all apart, then regraduated both top and bottom plates. He thinned down all rib blocking, as well as top and bottom blocks. After removing the “ladder back” bracing, he replaced it with a SINGLE diagonal back brace, sort of like half of an X brace. He reset the neck with 1 1/4" overstand, then made a raised saddle to keep string angles on the bridge correct. Carbon fiber neck insert, behind a new fingerboard.
Upper bouts are 20 ¾” wide. Ribs are 8 1/4" at the bottom, 7 1/4" at the bend, 5 3/8" at the neck heel. Body length (to bottom of heel) is 44". Bottom bout is 26" wide. String length is 41 5/8".
High-tech tailwire made from a super high-strength rope (“Vectran”
that Jed wove the ends of together with some sick nautical splicing (in addition to luthiery, he has a boat-building background). He made a new bridge, fitted with a Full Circle pickup. For me, he added a ½” diameter New Harmony delrin/carbon fiber endpin unit, made by David Bice. I need the 1/2" diameter pin, because I play with the endpin out pretty far (I will be changing the pin intself back to steel, because the bass loses its low-end "bloom" with the carbon fiber pin). Jed also changed the color from a reddish finish, to a dark, reddish-brown color. Ebony tailpiece.
What I love about it is the absolute quickness of the E string response, arco. No hesitation, with quick, room-filling E string sound. Punchy, blooming pizz. Arco, both the E and A strings are unusually full-sounding.
The bass is loud and full, both arco and pizz, with a clear sound throughout the range. The wide shoulders (again, not my first choice) give the bottom end some real meat.
It’s pretty wild. Sort of like one of those shows where they turn a Ford Pinto into a Nascar racer. Reminds me of the State Troopers I see driving around in insanely hopped-up, unmarked Taurus’.
It is sort of like that, too, aesthetically speaking. I think of the bass as my “Ugly Duckling,” the finish is funky, the external fit and finish (from the original maker) are a bit crude, here and there, but the engineering and execution of all of Jed’s work is dreamlike in its accuracy, thoughtfulness, elegance, and pure efficacy.
The E string, under the bow, has a fullness that reminds me of Ken Smith's Martini. When you hit the E there is nothing but a full, rich sound. The bass is very quick and easy to play.
It’s a 12 year old unlabeled Hungarian flatback, imported 12 years ago by E.M.M.C. Bought and played for about 10 years by Paul Nowinski. Brazilian luthier Paulo Gomes did some work on the bass, including installation of the hatpeg tuners and gluing linen strips on the inside of the ribs, to reduce cracking.
Local luthiery wizard Jed Kriegel got the bass about 1 ½ years ago, with an eye to rebuilding it, from the ground up. Jed essentially used the existing bass as lumber and a basic shape, and, working from the outside in, built a new bass within the outlines.
He took it all apart, then regraduated both top and bottom plates. He thinned down all rib blocking, as well as top and bottom blocks. After removing the “ladder back” bracing, he replaced it with a SINGLE diagonal back brace, sort of like half of an X brace. He reset the neck with 1 1/4" overstand, then made a raised saddle to keep string angles on the bridge correct. Carbon fiber neck insert, behind a new fingerboard.
Upper bouts are 20 ¾” wide. Ribs are 8 1/4" at the bottom, 7 1/4" at the bend, 5 3/8" at the neck heel. Body length (to bottom of heel) is 44". Bottom bout is 26" wide. String length is 41 5/8".
High-tech tailwire made from a super high-strength rope (“Vectran”
that Jed wove the ends of together with some sick nautical splicing (in addition to luthiery, he has a boat-building background). He made a new bridge, fitted with a Full Circle pickup. For me, he added a ½” diameter New Harmony delrin/carbon fiber endpin unit, made by David Bice. I need the 1/2" diameter pin, because I play with the endpin out pretty far (I will be changing the pin intself back to steel, because the bass loses its low-end "bloom" with the carbon fiber pin). Jed also changed the color from a reddish finish, to a dark, reddish-brown color. Ebony tailpiece.What I love about it is the absolute quickness of the E string response, arco. No hesitation, with quick, room-filling E string sound. Punchy, blooming pizz. Arco, both the E and A strings are unusually full-sounding.
The bass is loud and full, both arco and pizz, with a clear sound throughout the range. The wide shoulders (again, not my first choice) give the bottom end some real meat.
It’s pretty wild. Sort of like one of those shows where they turn a Ford Pinto into a Nascar racer. Reminds me of the State Troopers I see driving around in insanely hopped-up, unmarked Taurus’.
It is sort of like that, too, aesthetically speaking. I think of the bass as my “Ugly Duckling,” the finish is funky, the external fit and finish (from the original maker) are a bit crude, here and there, but the engineering and execution of all of Jed’s work is dreamlike in its accuracy, thoughtfulness, elegance, and pure efficacy.
The E string, under the bow, has a fullness that reminds me of Ken Smith's Martini. When you hit the E there is nothing but a full, rich sound. The bass is very quick and easy to play.
