Recent content by Agapit

If the stock sleeves were so light, then I decided to use them to install Schaller. I just returned from a turner who, for a symbolic $ 5, very precisely machined the inside diameters. I tried to make the photo as informative as possible and I hope that with an increase it is visible how thin...

I just knocked out and weighed the stock sleeve - it turns out that with it everything is not so bad! Weight is only 5 grams.

Aluminum Schaller in carbon body. I am leaving for the sea coast, but after returning I will set them up. I weighed the Schaller sleeve and got 5 grams. The standard sleeve is not aluminum, it is thicker and sharpened immediately with something like a massive washer on top. I also did not knock...

P.S Now I began to collect everything back - in fact, the standard tuner is also slightly smaller than the sleeve, it loosens in it and hangs freely. I don’t have a micrometer, and the eye is no longer as true as that of Apache, but the diameter difference is about 0.5mm. Schaller BM Light are...

The weight of a standard tuner (2MH1PC0004) is exactly 83 grams without bushings. The inner landing diameter in the head of the neck in the tree is 18 mm, the inner diameter of the sleeve (and accordingly the outer diameter of the tuner) is 14 mm.

Thank you for your trust and support! My guitar is 2020, fourth generation. I became interested in the geography of the tree from which it was made and I wrote to the experts of the European branch of Ibanez. Here is their answer, maybe someone else is interested, except me.

Greetings! I read the thread about the Talman, then about the Sire , a little about the different versions of SR and then again about the Talman completely!) Very interesting and competent, and this convinced me that I should have one! A week ago, I received a new bass with Thomann and now I ask...