Recent content by bodan

If all else fails I could do that, but it sounds a little chancy. How hard is it to get them back in if they aren't broken?

I know this thread is a couple of months old, but I am in a similar position as bass_giant. I just received a used 4003 Ric at a great price. Cosmetically it is perfect. The problem is the neck...I think. The Low E string never sounds right. It doesn't matter how much I try to tune it. It...

Bongomania, what about a QSC RMX2450 turned up about halfway? Would that be dangerous territory? (I don't really know much about current, watts, amps, volts, etc. I just want to make sure I'm not going to catch anything on fire or damage any equipment.)

If it's necessary (as in not enough outlets to plug gear into otherwise), is it safe?

Is is safe/okay to use a power conditioner or strip that is rated at 15amp or 2000w with a power amp that is 2400w?

Thanks for the replies. I just want to make sure I don't burn anything up.

So, I don't have to utilize the power section of the T Max? I think I remember reading somewhere that you need to have a place for the power section to go like a speaker cab or load box...?

I have a Peavey T Max bass head, and I just got a QSC RMX2450 power amp. Can I slave the QSC to the Peavey for power and just use the preamp of the Peavey, or would I have to run it to a cab also?

WinISD (beta) doesn't have this particular driver to choose. Any other recommended programs?

I suppose that's one option, but I thought 4.8 Xmax was decent for most bass drivers....?

Same subject, different question. I am looking at the specs for a Legend-cb15. I am noticing that a small sealed enclosure at 250w has really stable cone displacement for frequencies below 50hz (as does a large vented enclosure at 100w). However, when 275w is applied to the small enclosure...

I am researching for a speaker cab project. I'm trying to find the best 15" to 18" speakers for bass guitar within a 100 to 300 dollar range. Basically, I am looking for speakers that have the broadest frequency range, highest Xmax, and highest sensitivity. My question is this: Why would a...

I didn't mean to have both sets of speakers in the same box. Two separate cabs contributing to the overall frequency range.

What do you guys think about 2x15 ported and 2x10 sealed for a good, solid bass and mid spectrum? How about 12's instead of 10's for the sealed cab?

Your Mr. Foxen, I am not really a techie. But you have to start somewhere. Currently I have Peavey T Maxx, but I plan to get a QSC power amp to go with it. If I run across a Sunn 300/Bassman 300, Peavey VB2/3, or Ampeg Classic for the right price I would use one of those. I must say I'm...