Recent content by dw1003

  1. dw1003

    SVT VR - Won't come off standby

    I modded my svt vr to bypass the relay timer circuit... basically if your amp is seeing less than 120v it won't go off standby.. Here's a very helpful link from John K: SVT-VR
  2. dw1003

    Ampeg SVT VR New Tubes Bias Control / Balance Issue

    Resistors replaced, tubes tested, amp is biased and balanced... Sounds great one again!
  3. dw1003

    Ampeg SVT VR New Tubes Bias Control / Balance Issue

    yes, definitely everything will get checked at this point. While the amp is all taken apart, it's a good opportunity to clean and test everything...
  4. dw1003

    Ampeg SVT VR New Tubes Bias Control / Balance Issue

    Update... fried some tube resister screens. My friend who is a great amp tech was in town and was nice enough to service the amp for me. replacing all the fried resisters and hopefully be up and running tomorrow!
  5. dw1003

    Ampeg SVT VR New Tubes Bias Control / Balance Issue

    Ok great thank you! Sounds like a trip to the tech... Can anyone recommend an affordable ampeg guru in LA area? Thanks!
  6. dw1003

    Ampeg SVT VR New Tubes Bias Control / Balance Issue

    no the problem did not follow the tubes. Bias Control 1 still won't light
  7. dw1003

    Ampeg SVT VR New Tubes Bias Control / Balance Issue

    same problem after switching the tubes around
  8. dw1003

    Ampeg SVT VR New Tubes Bias Control / Balance Issue

    fyi currently all six tubes glow normal and look good when powered on
  9. dw1003

    Ampeg SVT VR New Tubes Bias Control / Balance Issue

    Hi Everyone! Home from tour and finally got around to putting new tubes in SVT VR I got 6 Sovtek 6550WE Tubes (from tubedepot.com matched sextet no 24 burn in), swapped them out and I've got a few issues... 1. Bias Control 1 (Green LED) is not lighting when it's taken out of standby. I've...
  10. dw1003

    Ampeg SVT-VR blows fuse and 2 power tubes HELP!

    Using backup head till end of tour or till CA shows so I can take it to my tech. Thanks for everyone's advice!!!
  11. dw1003

    Ampeg SVT-VR blows fuse and 2 power tubes HELP!

    Thanks everyone, I won't have time to have a tech look at it, but can purchase a new set of tubes in Austin tomorrow... My only worry is if there is an issue with the screen resistor that caused each of the middle tubes to go dark, I could blow another couple tubes. Is there a way to visually...
  12. dw1003

    Ampeg SVT-VR blows fuse and 2 power tubes HELP!

    Hi I'm on tour and my head blew a fuse and now I've noticed that the middle two power tubes are dark. The tubes are well used and abused (I tour and record regularly) The venue last night has sketchy power... This amp has been a workhorse and I've never had an issue like this. I...
  13. dw1003

    Ampeg SVT-VR Issue

    thanks, I ordered a whole new set of JJ preamp tubes 12AX7's and 12AU7's as I'm leaving for tour soon and I need spares anyway. Should be able to test it in a few days. I've had power tubes go out on me before with other amps, and this didn't really sound like a power tube. This is my first...
  14. dw1003

    Looking for opinions on this set-up

    I used one of these on a european tour. Not impressed, it worked fine, no issues, it was loud enough. But it wasn't inspiring. But this is coming from a guy that likes the ampeg svt thing. I couldn't get it dialed in to my satisfaction.