Recent content by Electromancer

Did you ever find that f-800b pre footswitch schematic?

Ok, fine. I just ordered a 4” port tube. Thanks again. Funny how each new avenue of diy exploration requires a new distributor.

I’ll see if I can find a flange that will work with 4” pipe. I’m guessing that having a 3” hole and a 4” pipe with a reducer would kind of defeat the purpose. Or maybe I will try to find something that’s actually meant for this purpose rather than something I can go by right away at Home Depot...

Killer. That’s pretty damn close to my cf measurement.

It’s 3” internal diameter pvc. I figured it may be too long. I plan on shortening it in place with my oscillating saw once I get to try it out. If you happen to easily be able to recommend a length at that diameter it might save me some time trying to fine tune it. Thanks

I didn’t get a pic before putting in the port panel but if I hold the light right you can see the flange through the grill cloth.

You guys rule! I’ve got my eye on the legend but at this moment putting $340 in speakers into a box that I impulse bought for $100 isn’t feasible. Right now (7:30 am on a Sunday) I’ve just finished thoroughly cleaning and armor-alling the exterior and I installed the plywood panel and port over...

First off I’d like to say thanks to everyone who chimed in here and especially to eniac for taking the time to run the modeling. I got in touch with www.tedweber.com about reconing and it turns out that the damaged speaker was already re coned at some point. Thing is, they re coned it for...

I just experienced some weirdness trying to respond to your reply from earlier. My reply was tacked into the quote I was replying to. Then I just made reply to no one. I think at least one of those was user error.

Weird. It looks like I somehow attached my response to the quote of your message that I was responding to. Well. It’s up there in the quote. Thank you.

I didn’t include shelf info. It’s 3/4 ply with a 1x2 or so nailer for the back on its top side (1x2 = 3/4 x 1-1/2). It is full cab depth.

I’m definitely considering that. I may start playing with some friends soon but this option would allow me to enjoy the box for now.

20” wide by 34” tall. Depth is 9 at top an 11 at the bottom so we can call it 10”. I think it came to somewhere around 3.8 cubic feet without removing any volume for the speaker.

Yeah. I definitely didn’t realize how deep this pond was before I jumped in. I like cool old stuff and I like projects but it looks like it’s gonna cost me three times what I paid for the thing just to replace the speakers. I swear it sounded fine at the shop. My guess is that it had sat for a...