Recent content by GUY DES ROSIERS

What ever you said agedhorse my positive experience with DeoxIt D5 with my LMT800 is now and for two weeks today positive my pots are scracth free and works just fine.

What ever said agedhorse my positive experience with DeoxIt D5 with my LMT800 is now and for two weeks today positive my pots are scracth free and works just fine.

What ever said agedhorse my positive experience with DeoxIt D5 with my LMT800 is now and for two weeks today positive my pots are scracth free and works just fine.

What ever said agedhorse my positive experience with DeoxIt D5 with my LMT800 is now and for two weeks today positive my pots are scracth free and works just fine.

What ever said agedhorse my positive experience with DeoxIt D5 with my LMT800 is now and for two weeks today positive my pots are scracth free and works just fine.

Piles of experience does not allow "a pseudo expert" to destroy my experience. With that number of members having this problem for many years I was so happy to share what occur with me cleaning my posts on my LMT800. Be sure it works what ever this expert that has been suspended in 2019 said...

With what I read from you be sure that I'll "never again" post anything on Talkbass.

No doubt about what you are writing but the "magic cure-all spray" worked for me that's why I wanted to share it. I tried the rotating the control a few times (it did'nt work) that's why I decided to give a try to spray directly the shaft and the famous small hole (maybe its'not an hole it may...

I was so happy to finally find a solution to these My Markbass scratchy pots, that is why I post my solution everywhere I thought it will be helpfull. Sorry that it is disturbing you.

Sorry I had such a hard time to pull out the knobs without damaging them they are back in place and I won't pull them out again to take a picture.

I bought a month ago a used LMT800, the Gain 1 was very scratchy and also the Master Volume. Since I know that they are sealed pots I removed the knobs and saw that there was a very small hole at the base of the shafts. So, this morning I sprayed DeoxIt D5 in these small holes and turn the shaft...

I bought a month ago a used LMT800, the Gain 1 was very scratchy and also the Master Vollume. Since I know that they are sealed pots I removed the knobs and saw that there was a very small hole at the base of the shafts. So, this morning I sprayed DeoxIt D5 in these small holes and turn the...

My first idea was to get the cleaner in the pots by spraying the shaft hoping the cleaner will get in the pots that way. I did that also so not sure if the cleaner got in that way only or both ways (Shaft + the small hole at the base of the shaft). The important thing is it worked.

I bought a month ago a used LMT800, the Gain 1 was very scratchy and also the Master Volume. Since I know that they are sealed pots I removed the knobs and saw that there was a very small hole at the base of the shafts. So, this morning I sprayed DeoxIt D5 in these small holes and turn the shaft...

I bought a month ago a used LMT800, the Gain 1 was very scratchy and also the Master Volume. Since I know that they are sealed pots I removed the knobs and saw that there was a very small hole at the base of the shafts. So, this morning I sprayed DeoxIt D5 in these small holes and turn the shaft...