Recent content by Jhtjon

I have a chance to buy an empty 200s cabinet. I plan to use this cabinet with my custom low wattage (30-150w) tube heads. My only concerns are alternate drivers that will fit in the cabinet. I'm looking for some other users experiences with this cabinet using something other than JBL D140...

I recently received four Sammi ME380B200 speakers from a friend that used to be a distributor. After looking around on line I found a page listing the parameters for the drivers. Plugging them into WinISD Beta I came up with a 10+ cu/ft box for each driver. Obviously this is not practical. would...

Here's my entrys can I get a Number. Supro Thunderbolt head. About 25 Watts with a single knob baxandall tone control. and my homebrew B18N head. I use a TL606 with both amps

So I plugged all the numbers into WINISD Beta how do I figure the maximum power handling before distortion?

Thoese are nice but a little out of my $$ range

THanks

Would a Single 15/6 work? is it efficient enough.

For the last few years I have been using a TL-606 with a EVM15B Driven by my custom 120W Bass head (Think ch1 Alembic F2B/ ch2 B-15 with 120W tube power behind it). While I enjoy the cabinet I think that a different cab will get me closer to my Ideal sound. I use a P-bass and I really like a...

Yes it looks like it is in the lacquer, Not yet

I bought a 4003 18 months ago, I love the bass and play it a lot. Recently I was traveling for work for an extended time and the bass sat in its case for two and a half months. When I opened the case yesterday I noticed some hazing in the finish at the base the 12th, 13th, 15th, 16th frets. The...

I am looking to build a 410 to use with my home built tube heads. My amps range from 50w to 200w. For reference I have a b18 style head. I have a 100w blackface style head and a 200w sunn style. Previously I have been using a pair of tl606's one with a 15l and one with a 15b. I Ike the low...

FYI I rewired my EB according to the series 1 schematics available. The difference is nothing short of amazing. much clearer and a slight bump in level. A worth while change. BTW I did not include the Bass filter circuit.

I am really confused. I was measuring the pickups on my new/used EB3 and found that the Bridge was only 6.98K and the neck was 1.34K. Could this be correct? I checked a few resistors on hand to verify my meter and it is working correctly. I additionally checked my '57 P and found that it reads...

I was wondering if someone could help. A while ago I built a B-18N (see page 9 for pics) I have decided that I would like to build an 18" cabinet to go along with it. Currently I am using an EVM-15B in a TL606 Cabinet, it sounds good but it is missing something that drove me to this model in the...

I think that I have an odd ball amp. It is an '82 mine does not have the foot switchable eq it is in the circuit all the time and mine is constructed differently (circuit boards are different).