Recent content by KarimelNick

Lol thanks for the responses guys, sarcastic and serious ones alike. I'll give all the suggestions a try

Theoretically it should work as I'm pumping 1600W at 4ohms to the cabinet. I'm not cranking it either, my gain and master volume are both at midnight/roughly 5/10 volume

Yeah, I've tried it with multiple basses and cables and I still get the loud pop. My low frequencies aren't boosted that high on my graphic EQ, and my lowest frequency is all the way to the bottom. The pop happens with both pickups on both basses that I've tried it with. For example, if I do...

Hey everybody! I'm running an Ampeg SVT-4 Pro, with an Ampeg 8x10 and a Rickenbacker 4003 and a G&L L-2500. I have the head mono bridged to give me 1600W. When I play, I'll sometimes get an extremely loud popping noise coming from the rig. It's different than the sound a string makes when it...

I just ran it mono bridged and it worked like a charm all night!

Lol just trying to play it safe man. Thanks for you help!

Also, on the graphic EQ, I have the option to use the 33Hz frequency. However, in the 810 manual it says it's lower usable frequency is 40Hz. Should I just keep the 33Hz turned all the way down?

The head is in an SKB case with holes drilled into both side for ventilation. I'll reply to the thread later tonight after my band finishes practice. I'll also definitely get a fan for it too.

Thanks for the advice! I do have another cable that is wired for the mono-bridged option, I've just been too afraid to use it lol. I'll mono-bridge it tonight at practice to see if that makes a difference with the whole cutting out thing. If it keeps doing it I'll take it to a Ampeg repair...

Hey guys, I'm new to the forums. I figured this would be the best place to ask my questions I've had about my head. I am currently running an Ampeg SVT-4 Pro through an Ampeg 810E cabinet. I don't have it mono-bridged, I'm afraid of blowing out the cabinet from giving it too much power. I am...