Recent content by mikeynets

I don't know if it's allowed, but can you share what ebay seller you used? Also, how was the heel thickness? The neck I received was visually stunning, felt amazing and may have been perfectly useable, but: The tuner holes on mine were small and I was impatient. I sanded them a bit, , then a...

Would you have both rosewood/laurel/other dark fretboards and maple boards? Price is right btw

Very helpful — thanks!

Tell me how it compares to previous PUs in this bass. I'm considering doing this to one of my Ps, but I really want it to sound different from a P — not different ballpark different, more like left field vs right field of the same ballpark.

It can’t hurt. But re-reading some of your previous posts, it sounds like you’re more after the limiting component of compression. I use Amp blocks “as compressors” or maybe better states as “in lieu of compressors” more for tone. A great feature of the stomp is how many different ways you...

Are you using the stomp in front of an amp or going straight to a mixer or daw? I use mine in front of an amp and I’ve found almost every patch that sounds good on line is designed for ampless use. Good to dissect and analyze and learn from, but ultimately for my use case I build everything...

I am kinda obsessed with the Dub King. I've never seen or heard on in person, but all the demos online, the look, everything about it makes me want one so bad. But at the same time, I'm kinda a minimalist. 99% of what I do, I do on a P bass. And I recently assembled a short scale P that really...

If I'm reading this correctly, the knob positions may be what's creating the variance. Or maybe I'm way off. Either way, I had some frustrating experiences with carefully built presets not sounding the same and it was usually me fiddling with the knobs. Totally user error. I was really into...

Officially, 4 ohms. The manual is a little vague on possibly lower impedance handling so I emailed Pat Quilter and he said used judiciously, 2.67 ohm load should be ok and that the 803 has safety features built in that would protect the amp if it was in danger. Nothing about protecting cabs though!

Thanks for the feedback. Good points about space and placement of the CQ12T on the floor. Do you own either the CQ20B or the CQ12T? I think my primary use will be for recording our band at our studio. The live performance scenario is, for now, secondary since a good amount of the venues we'll...

I did look at that as well, but my main concern was 100% reliance on a tablet. How was the built in router? How did you find that in practice? Did you ever use it at outside gigs — any issues with heat, visibility in direct sunlight? Our shows will predominantly be small - medium bar gigs with...

I'm currently in a three-ish piece instrumental-ish band and we're looking to record and to start booking some shows. I want to get a mixer that will work well for both recording and live performances. Quick backstory: We're all decently experienced musicians, just not so much on the...

Those look really sharp. Is that a 15 and a 12? How do they compare to each other? I currently have a RS210T (4 ohm) and Mesa Subway 15 and they're both great, but I'm thinking about selling both and getting 2 Rev RS112 II. But maybe a 12 and a 15. . .

@Spector2112 and @jajjguy those both look great! Spector— is that a different grille from standard? The wood baffle really shows nicely through it.

I was reading this thread waiting for the HX Stomp version — thanks! Are you summing both signals in the patch prior to output or are they going to separate outputs?