Recent content by NoHitWonder

Have you tried an Aphex Bass Xciter? It thickens up the low end without changing the overall volume or tone. [Invalid or Expired Link Removed]

Moosapotamus makes a Bass Paralooper with Low pass & a High pass switches & knobs - with it you can keep your low end on the original signal using the Low pass and then use any Whammy pedal in the effect loop (and possibly use the High pass switch to only send the highs to the effects in the...

Have you tried any other Synth Modules with your MidiBass? I have a Alesis NanoBass that has decent bass sounds in it. I think it has 256 presets. They can be found on ebay sometimes for $50-$75. I use mine with a 25 key Midi Controller now but I have used it in the past with a Roland...

I use either 1 or 2 voltage regulators for our PA equipment at most of the places we gig whether we need them or not. They are suppose to deliver a constant 120V even if the input voltage is as low as 80V or as high as 140V. The units have a maximum ouput capacity of 1250W and a nominal input...

Have you tried reversing the wires on just one pickup? I have 3 Peavey Foundation basses that I installed blend pots in. I had to reverse the wires from one of the pickups to get the result that I wanted.

Does your BBE Sonic Maximizer have a Lo Contour Knob? If so, does turning the knob to the left help fix the problem? You may want to check your manual to see if the Lo Contour is a bass boost (such as +12db @ 50hz as some models are).

I don't know if there is a "cheap" way to do foot operated samples but it can be done for under $200 with some limitations. I recently purchased a used Boss RC-2 pedal off ebay for $130. They typically sell for $180 new. I use it to trigger recorded phrases of keyboard parts for a few of...