Recent content by VerdaLum0

Thank you! However, I would like to know these specifications, unless they are a corporate secret!

Yes, 100 is more than enough! But I would like to have an understanding of the internal memory capacity of the device. I am also interested in information about the characteristics of the IRs that can be loaded into the pedal. I want to know if they are converted to a proprietary format or...

Hi! I couldn't find the answers in the documentation. I'm interested in how many NAM profiles and IRs can be loaded into Anagram. In simpler terms, how much internal memory is allocated for this? Also, with some NAMs, when I used them, I got a message about the device overloading, even though...

Another great advantage of this package is that IRs of the same quality are initially balanced, so they can be mixed without phase distortion. The manufacturer does not recommend using normalization, which can disrupt this balance.

It's unusual that cabinets and amplifiers are located in the same folder. To access a cabinet, you need to scroll through all the amplifiers. Despite the large icons, the names of the factory models are not obvious. It would be great to add the ability to select by name, similar to how it is...

Hi! I'm joining the Anagram user community. It's undoubtedly a wonderful device, and the team's extensive work on improving it is greatly appreciated. Despite my experience with other processors, I'm still trying to get used to it. Despite the pedal's user-friendly interface, the first thing...

I found the answer to my question in the manual for the G11 processor, which belongs to the same line of processors as the b6. In this processor, the IR length is limited to 2048.

Information about the characteristics of the factory impulses might be helpful, but it is also unavailable for analysis.

Thank you! Yes, I also use IR with the maximum resolution and length, but I'm interested in this question because if the processor uses trimming when loading IR, there may be a loss of important information. If this happens, it would be more appropriate to load pre-prepared impulses into the...

I will appeal to experienced users of the processor. I did not find information about the supported IR length in the manual. Only information about the bit depth and sampling frequency. From my experience with other processors, I know that even in high-end devices, the length is usually limited...

I have the opportunity to compare B6 with Ampero 2 stage. There is also a pack of bass tones for the Tonex pedal. In the end, I still go back to B6, which has everything in its module list to form a fundamental bass tone of any character. And at the same time, he manages to emphasize the...

I agree, most likely the interaction with the application works using the MIDI protocol, I don't think Zoomcorp invented the bicycle, but I don't know how it works. Perhaps this option is possible via Bluetooth, I can't check it, I have Android. So it doesn't work out of the box.

Hi! No, from the external control, the device only has an expression pedal, which can be assigned to control effects from the Pedal category. Another disadvantage is the lack of MIDI.

I have the latest version of the application installed, and as far as I know, the base 1.0 firmware of the pedal has not been updated by the manufacturer.

Hi! I have carefully read your messages and purchased this processor. After two weeks of thoughtful use, I can say that I was not mistaken. Despite the insufficient processor power, it is enough to generate the necessary sound. The built-in modules are perfectly configurable and for the most...