Recent content by xinsaneguitarzt

  1. X

    XLS202 to BBE Bmax Help

    Actually I have Heard it a hand full of times on this site and that was one of the factors that made upgrade to a modular rig
  2. X

    XLS202 to BBE Bmax Help

    I never buy cables i buy the cable in bulk from partsexpress and make my own its much better that way cause half the tim cables come brand new with cold joints and what not.
  3. X

    XLS202 to BBE Bmax Help

    Update my rig is cranking now it was the cable. i just took a mic cable cut the end off and hooked up a 1/4 to it with the shield and ground to the barrel and the positive to the tip. Even though Im only runing 680 watts bridged it is way louder and alot more head room than my carvin r1000. I...
  4. X

    XLS202 to BBE Bmax Help

    Well I read an old post on here about a guy hooking up a svt pre to the crown xls like me and mention someting about an unbalanced xlr to 1/4 was needed to get full sound. so im ont the right track just dont know to unbalance the cable.
  5. X

    XLS202 to BBE Bmax Help

    The prob is I need a balanced xlr to unbalanced 1/4 a friend of mine says I need to cut a mic cable then wire pos to the tip of the 1/4 and the shield and neg to the barrel. I could buy one but i alwats have spare cables and connectors hand so no need to buy one I Just wanna make shure he is...
  6. X

    XLS202 to BBE Bmax Help

    thanks bongo hey do you know off hand what the out put specs of the bmax is? so i can look for a power amp that works.
  7. X

    XLS202 to BBE Bmax Help

    so what would be a low priced power amp that be good with the bbe a qsc gx? or maye samson sx? peavey pv?
  8. X

    XLS202 to BBE Bmax Help

    The BBE B-Max has 1/4 unbalanced out and the crown only accepts xlr Balanced in so I purchased a cable but the sound is weak and the guy told me I need to unbalance the cable cause it it providing a weak siginal.
  9. X

    XLS202 to BBE Bmax Help

    Having trouble with the un balanced cable if i cut a mic cable what wires do i hook the 1/4 tip and ring to? or do i cut a guitar cable and hook up xlr to it which wire goes to what pin? Thanks
  10. X

    Carvin R600 question

    500 is a good deal the 600 head ushally sells for about 250-300 used and the 15 cab sells about 200 use so he is getting a good deal plus the head is also rack mountable if u decide to use it in a rack system like my carvin 1000 same head just a bit more balls. i have it in a rack with a power...
  11. X

    Acoustic B410 too good to be true?

    Well the tone on my ampeg 610 is huge but it is over kill when the guitarizt is using 50 watt combos ya know, so the acoustic is real nice specially for there price.
  12. X

    Acoustic B410 too good to be true?

    Just picked one up last nite and played a gig and it seems too good to be true. I was using an Ampeg 6x10 but it is just to heavey and too much cab for my needs so I grabed one of those acoustics I was skeptical at first but it gets loud and fairly low. works perfect for my counrty power trio...
  13. X

    Favorite song to play live (cover bands)

    Ill have to go old school and say pretty woman by Roy. or Elvis - Suspicious Minds bolth simple bass lines but can really be awsome if your in the pocket
  14. X

    Left hand from hell (keyboard player)

    Never had a problem with key players but I did threaten to break a drummers kick foot, one day I was playing a gig with a new drummer and he was kicking when there was no need to kick and he was way off beat on like the whole set so on our break from the sett\ I told him "see that dass drum...