Recent content by zastruga

Only if I can use an off-brand Sharpie from the dollar store...

They are screwed in. But the screws are significantly smaller than standard amp feet screws. I was hoping someone had found a direct replacement. I'm not too worried about future resale either, adding feet shouldn't be too permanent to undo, and I got the head cheap enough I'm not too worried...

Well, I have no intention of ever buying a Rumble cab. I've got a friend who's a cab builder, so all our cabs come from him. Also, feet can always be changed back if I need to sell or something. I'd live with the wobbly, except it rattles like crazy against the metal on the handle. Turning it on...

Cab is done! The 3012HO worked *perfectly*. Surprisingly thunderous low end (it'll shake the walls with the bass knob at noon), plenty loud, and a nice full midrange. Checks pretty much everything off my initial list... sound is similar enough to the Deltalite, volume is ample to play with the...

Practice rig is go! Sounds great and surprisingly loud/bass heavy for a tiny 1x12 cab. BUT... the feet on the Rumble are too short to completely clear the handle. Has anyone replaced the feet on these things with taller ones and happen to know what might fit?

Not sure when I was snarky or how my goal posts have moved. I said in the original post I didn't think it was actually doable and within another post or two clarified my parameters and that I was looking for something "as close as possible." I didn't need a bunch of math telling me what I...

(I do appreciate the handful of you who were willing to actually accept my premise and discuss possible solutions! I do have a slightly clearer plan of attack now. Slightly. :D )

Right on! Anyone have anything constructive to add? Or should we just delete this thread because it went nowhere?

All of your posts from the very beginning have been condescending and dismissive. You assume that because I ask for something on the edge of possibility that I am an idiot and have been trying to shut down the conversation since your first post. I understand the limitations and have been open to...

I'm not looking for numbers proving that the perfect example of what I'm after is impossible. I already know that. I'm looking for real world experience that tells me what will get me closest. Your experience is FAR more valuable than someone just telling me "no" over and over to prove me wrong...

Thank you! Much more useful than a slew of esoteric numbers and badgering about how dense I am for asking a question. The only thing that worries me is the 300w rating. Even running at 8ohm it's still under-powered for my head. What's your amp setup?

I've played small, single speaker cabs with big full sound before (hell, some of them even Mesa cabs!). I know it's possible. Everyone just keeps getting hung up on the idea that I expect the impossible and I've been more than clear that I don't. I want a speaker that can be safely run with a...

Again, you take my list of wants FAR too literally. - I likely am not going to be running at 500w ever, but I also don't want to put in some wimpy speaker that will blow if someone accidentally turns it up too high or a fuzz pedal gets the volume knocked to 11 or whatever. The 500w is more...

Hmm, comparing these two, the Kappa might actually be less of a compromise. The Rumble is only 350w at 8ohm, but 100db vs 97db means the wattage drop is probably negligible while still leaving a little headroom in the speaker to protect against blowing it.

I missed this earlier. That certainly sounds like the ticket! Doesn't look like the speakers are available without the cab, but damn that sounds exactly like what I want. I have a cab maker friend who will be doing the cab work, so I'm not really looking for a pre-built option, otherwise that...