Enjoy the benefits of a premium membership!
Upgrade Account
Zooberwerx's latest activity
-
Zooberwerx replied to the thread TalkBassers in real life.Met more than a handful. Strangely enough, those that are the closest won't give me their home addresses. One particular TBer in... -
Zooberwerx replied to the thread Output jack cup isnt flush and it teeters side to side.That was my first thought. I'm guessing a 7/8" ID with a thickness </= 1/16" will get you close. Riis
-
Zooberwerx reacted to Turnaround's post in the thread Output jack cup isnt flush and it teeters side to side with
Like.
Changing the cup will not help. The problem is that the body is curved where the jack cup is, but the cup is not. Best solution is to... -
True of solid state amps. Tube amps are not necessarily as flexible.
-
Zooberwerx replied to the thread 4ohm amp with an 8amp cab..OK?.Absolutely. For the most part, any amp will accommodate a 4 or 8 ohm speaker load. A handful will do the 2 ohm bit but that's not a...
-
Sorry...meant 8 ohm cabinet in title..my bad..
-
Zooberwerx replied to the thread Taking a bass on a wheelchair.I would contact Drive DeVilbiss Healthcare to see what bolt-on options are available. I doubt if you'll encounter "bass hanger" but you...
-
I need to fold both wheelers to get them into a car. Weight needs to be kept down, too. You can see more of the hand chair by looking...
-
The Ibanez approach, in my opinion, is a good approach. I’m just not crazy about the mounting and how it looks aesthetically.
-
Zooberwerx replied to the thread Headless Club???.I pretty much limited myself to those aftermarket products which are readily available and not subject to custom fabrication. A big...
-
Yeah, the intention for the channel was to have access to the truss rod hole, but I think if it's mounted far enough from the nut there...
-
Zooberwerx replied to the thread Headless Club???.We're on the same page...I particularly like the 2nd schem (side view) but with one question. Are we looking at introducing the wrench...
-
Maybe, but it appears to be a 10° tilt back, not 14 based on what I'm seeing with this close-up drawing. I included a 5° entry for the...
-
Zooberwerx replied to the thread Taking a bass on a wheelchair.I'm out of the biz but custom seating / mobility was a component of our realm. I'd be looking at the hardware which can be mounted to...
-
Here's how I can take a bass on my two wheelchairs. One wheelchair is electric ; the other is acoustic. The gig bag straps thread over...