Search results for query: *

Noted! And the total 4" should include this 3/4" or so front baffle thickness I suppose, so the extension will only be about 2" or a little less

True, luckily they did cancel it and refund, and a user here may be able to help me out with a good quality 2240 or 2241

Welp, I should've asked yourall's advice before pulling the trigger :sorry: at least he did accept an offer much lower than the listed price.. I've messaged to ask if I can cancel the order, hopefully that works out. Currently I only have a 130 watt/side @ 4ohm (non-bridgeable) Peavey PV 260 amp...

It's this one, hopefully I didn't get something with a bad recone job.. JBL 2241GPL 18" Sub Speaker - 4 ohm Low Frequency Transducer Pro Series | eBay

The 2241 is bought and I'll get to work finding a piece of pipe! Will report back soon, appreciate all the advice

There's one 6" diameter port in the lower right side now, and it extends about 1 3/8" back into the cab. Sounds like i may extend that one port to be about 4" long, and will put some 2" fiberglass insulation on the back and sides, then put a JBL 2241 i found on ebay in there (haven't bought...

Appreciate the input! Does that mean I'd be best off adding a 4" port on the lower left in addition to the 6" port already there on the lower right, then adding a cardboard or PVC tube to each of those with total length of 4"-6" each?

Ok great, so roughly 4" total length of cardboard or pvc pipe extending into the cab, measured from the inside wall? The existing piece goes about 1 3/8" in, so I guess just another 2.5" or so. Should anything else happen in there as far as insulation, dividers etc?

Thank you x1000. What do you mean by "lengthen the duct"? As in a pipe would go into the box from the 6" port? Also do you know the name of the cab size application? I couldn't find it from searching but I know I've seen it on old posts before

I want to push back a bit on everyone saying "wrong tool, get a true sub." My original question and one i would like a direct answer to is: could I improve the low end response of this cab with a different woofer and/or with internal insulation/dividers/different size port? If so would an...

I believe so, though maybe this is an early 90s version? Really not sure

Sure just let me know, I'm about 4 hours east of Nashville near Johnson City but could possibly meet if you really want this thing

Sadly I'm across the country in Tennessee, wish I was in PNW though! Most likely ridiculously expensive to ship this across the country.. I'm thinking about selling the speaker alone for that reason, no idea what to do with the empty cab though

I recently picked up an 80s/90s Peavey 118D 18" bass cab with model 1801 Black Widow speaker (I think it's sn 427731 fwiw) for $80, and I'm wondering if it's possible to get a much stronger reproduction of very low end than with the stock speaker and setup. I'm a noob when it comes to cab design...

For the sake of anyone who might come across this thread in the future with similar problems, thought I would update to say I finally sent it off and got it fixed by Lynn Rochester (Ampworks) near Greenville SC for $120. Working like a charm now, and I'll just post our email exchanges below for...

Can you suggest anyone, preferably in eastern US?

Belated update, but the previous "fix" was short lived unfortunately. Reseating the tubes caused the amp to work again for a week or so, but then went back to previous state (powers up, red led comes on, but won't exit standby and no sound passes). I got the deoxit d5 and microbrushes and...

Thanks yall, sounds like the cloven hoof's better low end is enough to recommend it over the hoof reaper? Tone reaper side isn't as crucial for the sound I'm after?

Any idear how the monarch compares to the $30 caline orange burst? Caline USA Digital Overdrive Guitar Effect Pedal with 4 Control Knobs (CP-18) https://www.amazon.com/dp/B00GC2F0UK/ref=cm_sw_r_cp_apa_i_NoQxEb41X8EQ1

Isn't plumes pretty much covered by Palisades? Different enough to consider Plumes instead of Palisades?

I looked at the monarch and found a couple used for around $100, I assumed it was more of a flavored boost and maybe similar to the cheap af Caline Orange Burst, very open to reconsidering. I have a DOD bifet boost that I haven't put into rotation yet fwiw

That's what I'm thinking, I already have a few Morley ABY pedals so was thinking of sending "guitar" freqs to fender twin (or possible monoprice 15w tube amp), med lows to Ampeg w/15" cabs, and possibly sub bass to a cheapish pre and SS power amp with 18" cabs. Would ideally have thick sludgy...

Thanks for helping to eliminate Spires at least! Don't think I'd have much use for octave up, just octave down really and I already have a meatbox and sub'n'up that I haven't put into rotation yet. From online vids Bit Commander sounds a little too crazy for what I'm trying to do, bigger chords...

You did break the first rule of the thread ;) but just watched Andy's demo (proguitarshop) and might just have to grab one of these too.. I remember seeing them going for like $30-40 new a year or two ago then read some bad reviews at the time, from revisiting reviews looks like it's just a bit...

I'm all for supporting small business if you can afford it, would def go that route if possible. I think I got my morley on reverb used for like $30 but not seeing any affordable ones on there or ebay right now

Yes, that's exactly how I use it

This one works quite well for me https://www.amazon.com/MORLEY-ABY-Mix-Morley-Combiner/dp/B003AIM6GK

The GAS is strong with me right now re: various EQD pedals, but I'm getting a stress headache from trying to sort through all the damn options. For the love of god please don't suggest something non-EQD in this thread haha, head would then explode. For the record I'm also GASing over Team...

Hey all, for the record I very much respect and appreciate Agedhorse (Andy's) vast knowledge and experience, and looking out for people's safety. To me it was kind of like if an engineer that worked on a Cummins engine hung out on a Dodge forum and told a thrifty consumer to take it into a...

Can't figure out how to edit the thread title or I definitely would :thumbsdown:

I'm guessing from your bio you're a full time technician and keen to protect your profession, which I totally understand. With that said, you should know this kind of thing comes off as condescending and makes people like me even less likely to use techs instead of self diagnosing. I'm fully...

I think I paid $400 for it used, I have to assume any tech bill for actual repair work would be around $300 so it's a bit tough to justify paying that vs selling for parts and buying another if it really was non-functional. Also I live in Jenkins KY, 2.5 hrs to Asheville NC, 4 hrs to Cincinnati...

10-4, will follow all that to a T. I don't mind a bit doing moderate maintenance; I'm happy to change my oil, fuel, and air filters but I'd rather not change a head gasket or mess with a transmission. This was made in China and the shipping conditions comment makes sense to me

Great, that's super helpful. Quick question, can I directly spray Deoxit D5 directly into the socket contact without removing them from the amp and then clean with interdental brushes, i.e. is it fine for the Deoxit to run down into the amp? Also I'm assuming "micro tight" like these on Amazon...

The only issue still in my mind is why the hell did this happen in the first place? I haven't been gigging at all, just working on new material by myself (i.e. amp hasn't been moved in months). I love the sound of the PF-20t and haven't heard of any other reliability issues, but it seems weird...

JimmyM for the win! Followed your/beans-n-toast's advice and pulled and reseated all the tubes, working like a charm now (LED does switch to purple when working properly btw), thank you sir. I just hope others searching forums on issues like this in the future see this and don't follow the...

Great, thanks for the input. Would it make sense for none of the tubes to glow if just one has gone bad? Also am I right in thinking a blown fuse wouldn't allow the amp to come on or front LED to glow? Finally, is running it low volume like I've been doing potentially bad for the amp or harder...

If the answer is "sounds like you should switch out your tubes" or "replace easily accessible transformer(s)" that's a pretty simple and non-dangerous fix I can do. I have no intention of getting into the PCB or messing with capacitors, if it's that bad I'll call it a loss and sell for parts...

If I had the cash or lived anywhere near qualified techs I wouldn't be posting on here, no offense but I'd really appreciate it if people only post if there's something useful/productive to add