fretless neck

  1. Ewart Guitars - Fretless Bass Neck for Project
    Closed

    For sale Ewart Guitars - Fretless Bass Neck for Project

    Ewart Guitars - Fretless Bass Neck for Project - Reverse Headstock, Nut Cut for Right-Handed Play Okay, so this is an odd one. This came on a G&L SB1 mutt project, I eventually turned that project into this bass...
    $200.00
    $150.00
  2. FRETLESS MIM Jazz Neck
    Sold

    For sale FRETLESS MIM Jazz Neck

    This is a nice ROSEWOOD board lined fretless from an MIM jazz (stamped June 2012). Neck has a nice satin feel. Bought it from a piano technician a couple in months ago. Will ship in a fender replacement neck box. I would use “23/32” tuners on this guy; I had to wrap a bit of electrical tape...
    $200.00
  3. Mark Karwan

    SOLD FRETLESS MIM Jazz Neck

    This is a nice ROSEWOOD board lined fretless from an MIM jazz (stamped June 2012). Neck has a nice satin feel. Bought it from a piano technician a couple in months ago. Will ship in a fender replacement neck box. I would use “23/32” tuners on this guy; I had to wrap a bit of electrical tape...
  4. Zer0Frettz
    Closed

    Wanted 1990s-2000s EBMM StingRay Fretless Neck (4-String)

    I'm looking for a mid-1990s through early 2000s 4-string EBMM StingRay Fretless Neck. Maple w/Pau Ferro unlined fingerboard, with a six-bolt neck attachment and a fully functioning truss rod. Please message me if you have one you're willing to part with. Thank you!
  5. Very Good Mighty Mite Fretless Neck
    Sold

    For sale Very Good Mighty Mite Fretless Neck

    Great playing neck. Very straight and level Ebonal board that has only seen flats. This neck smokes a lot of my USA Fender necks. 1 5/16 nut width. Shipping incl to cont US.
    $120.00
  6. Bodeeni

    SOLD Very Good Mighty Mite Fretless Neck

    Great playing neck. Very straight and level Ebonal board that has only seen flats. This neck smokes a lot of my USA Fender necks. 1 5/16 nut width. Shipping incl to cont US.
  7. TempImageZe5SQc

    TempImageZe5SQc

    1970 Fender fretless neck, back
    • FunkHead
    • Media item
    • 1978 fender fretless neck
    • Comments: 0
    • Album: AVRI 57/78 Fretless
  8. TempImage54Y8P5

    TempImage54Y8P5

    1978 Fender Fretless neck, back
    • FunkHead
    • Media item
    • 1978 fender fretless neck
    • Comments: 0
    • Album: AVRI 57/78 Fretless
  9. TempImageFzzvpi

    TempImageFzzvpi

    1978 Fender Fretless neck, back
    • FunkHead
    • Media item
    • 1978 fender fretless neck
    • Comments: 0
    • Album: AVRI 57/78 Fretless
  10. Fender Jazz Fretless Neck
    Sold

    For sale Fender Jazz Fretless Neck

    Fender Jazz Neck, fretless, rosewood board. Made in Mexico. Nice neck. Some small dings and the maple is separated just a bit from the skunk stripe on the back of the neck at the 9th fret. It came to me like that. I planned on fixing it but it never bothered me enough to actually do it. It...
    $125.00
  11. Phillyfunk

    SOLD Fender Jazz Fretless Neck

    Fender Jazz Neck, fretless, rosewood board. Made in Mexico. Nice neck. Some small dings and the maple is separated just a bit from the skunk stripe on the back of the neck at the 9th fret. It came to me like that. I planned on fixing it but it never bothered me enough to actually do it. It...
  12. Nick von Nick

    Fretless Necks for Mustang Bass (Fender or Aftermarket)

    Hey TB, I have a lovely Fender Mustang (Invalid Link Removed), but my hands have become wretchedly corrupted by my constant fretless playing, and now frets feel alien. Okay...not really, but because I also have my eyes on a few shortscale fretlesses, I'm considering skipping a new instrument...
  13. Fretless Fender Jazz Neck 5 String (warmoth)
    Sold

    For sale Fretless Fender Jazz Neck 5 String (warmoth)

    Great neck, very little use. Will fit a Fender Jazz 5 and 5 Deluxe. Lightweight tuners. Side markers and ebony board. $25 shipping.
    $250.00
  14. bassgrackle

    SOLD Fretless Fender Jazz Neck 5 String (warmoth)

    Great neck, very little use. Will fit a Fender Jazz 5 and 5 Deluxe. Lightweight tuners. Side markers and ebony board. $25 shipping.
  15. Fender Precision Fretless Neck 1972 EXCELLENT!
    Closed

    For sale Fender Precision Fretless Neck 1972 EXCELLENT!

    Up for grabs is a vintage 1972 Fender Precision maple/maple bass neck. This bass started life as a fretted neck and was made fretless in the mid 80s. The frets were not removed however, they were filed down and covered over with some type of finish. Not really sure if it’s polyurethane but...
    $1,400.00
  16. PeckBass

    No longer available Fender Precision Fretless Neck 1972 EXCELLENT!

    Up for grabs is a vintage 1972 Fender Precision maple/maple bass neck. This bass started life as a fretted neck and was made fretless in the mid 80s. The frets were not removed however, they were filed down and covered over with some type of finish. Not really sure if it’s polyurethane but...
  17. jjmf
    Closed

    Wanted Neck for Ibanez Gary Willis Fretless gwb35

  18. jjmf
    Closed

    Wanted WANTED: New NECK FOR IBANEZ Fretless GWB35

    I love my Gary Willis Fretless but the truss rod got stripped (could not correct enough relief to get nice and straight in certain weather here in Alberta) so i am looking to replace (or repair ... ie replace truss rod with new one? a luthier said its possible to drill out from the "body side...
  19. Parts bonanza!!!! Necks, pickups and electronics, hardware
    Sold

    For sale Parts bonanza!!!! Necks, pickups and electronics, hardware

    I have bass parts, gadgets and other various things bass related coming out of my ears; it’s totally ridiculous. All prices include shipping but I humbly request that the minimal order price be $10 I will answer what I can but some of these parts have been in the parts drawer for years, maybe...
    $5.00 to $100.00
  20. KeithPas

    SOLD Parts bonanza!!!! Necks, pickups and electronics, hardware

    I have bass parts, gadgets and other various things bass related coming out of my ears; it’s totally ridiculous. All prices include shipping but I humbly request that the minimal order price be $10 I will answer what I can but some of these parts have been in the parts drawer for years, maybe...
Top Bottom
Back