• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

7 string bass build

ImageUploadedByTalkBass1382661963.544876.jpg
A progress update!! I'm finally done carving the neck! Now it's on to the body wings! The wings will be made out of ash, with purpleheart binding. I'm also thinking about pickups. Does anybody have experience with Delano jsbc or sbc 7 string pickups? Those are the only ones I can find without custom ordering pickups.
 
Yes,

Let me start by describing my 7 string since I can't publish pictures yet. I am using a 5 piece poly laminate Maple/Purple heart/Maple/Purple heart/Maple. The body sides are Mahogany. The neck is like steel. Mahogany is the best sounding wood but a pain to stain because it's like a sponge and it takes 5 coats just to fill to pores.

Anyway it is loaded with two Delano's. It is loaded with an sbc 7 and and sbc 7 quad coil on the bridge. Bartolini's are good enough but if you have money to burn these pickups have a better extended range.

1. Quad coil.

What I did was place the front coil where the jazz lead goes and the back coil is further back. I understand that the Fender jazz bass lead pickup changed position through the years so this gets both sounds. I wired it with an on/on/on toggle (Delano site has the schematic) so that I get front coil/both coils/ and back coil. You have to understand that they wire it like a P-Bass and a reverse Pbass so B,E,A,D is on one coil and G,C,F is on another coil. There is an option where you can put both the humbuckers in series and make a superbucker. I didn't go for this because it just made a louder version of what I already had. The Delano website will explain it better.

What I am getting is the back coils quack like a Jaco bass and the the front coils sound smooth like an alembic bass. A+B is a subtle combo of the two.

2. Standard SBC.

What I did with this was attach a series parallel switchpot so I only get two sounds. Parallel sounds pretty standard and series makes it Huge. I wanted no hum at all so I didn't mess with the single coils sounds but someday I might.

Rear coil is green + and yellow -
front coil is white + and brown -

Delano does not have a diagram for the switchpot circuit which is pretty strange but I was able to reason it out.

Now that you have a headache.

Bartolini also makes seven string pickups when you can get them. They are great, great, great but the Delano's are just a little bit better. Whether this justifies paying an extra $80 per pickup is up to you. Personally I'm glad I did.
 
Sorry for the late reply. My parents stopped paying for Internet service so I haven't been able to reply. Thanks for the info on Delano pups! Because money is tight I'm going for the bartolini g6 7 string pups. If I continue with my luthier addiction I'll probably save up a BUCH of money and go all out. Anyway, thanks for the info! Here's some pics. ImageUploadedByTalkBass1388126545.249584.jpgImageUploadedByTalkBass1388126562.307905.jpg