SOLD Acoustic Image Focus 2R III

Up for sale is my Acoustic Image Focus 2R Series III. Bought it used a few months back and now I'm using a wireless system and a small tube amp for small settings. This one is now extra and needs a good home.

Everything works as it should and the amp has the transparency that Acoustic Image (AI) is known for. The amp can do transparent low power gigs too, but it has the power in reserve to hammer when you want to do that too.

All the features and functionality of the Clarus 2R, but twice the power: 1000 watts into 2 ohms, 800 into 4 ohms, and 450 into 8 ohms--with studio-grade digital reverb, delay, chorus and flange built in.

Two completely independent channels can each accept either standard instrument cable or XLRs connector. Built-in phantom power for both channels.

Both channels have its own variable HPF (high pass filter) or notch filter to tame feedback frequencies.

Amp comes with the AI Focus bag. I will pack it well and ship in a new shipping box.

Price is shipped, payment is via PayPal.

Specs (from manual for both Clarus and FOCUS):

115V/60 Hz or 230V/50 Hz, switchable
Size:10x8x3.5 inches
Weight: 4.8 lbs
Mic Input: 600 ohm balanced, XLR connector
(Phantom Power: 38 volts, on/off switch w/LED indicator)
Instrument Input: 1 M impedance, 1/4 inch jack
Direct Out: +4 dB, balanced, XLR connector, ground lift, pre/post EQ selector
Effects Loop: Parallel type with return level control
Bass Control: Shelving type, ±15 dB at 60 Hz
Mid Control: ±15 dB at 650 Hz
Treble Control: Shelving type, ±25 dB at 10 kHz
Notch Filter: >-18 dB sweepable from 30 to 800 Hz
Low Cut (a/k/a High Pass) Filter: -12 dB/octave sweepable from 30 to 800 H

Power Amp
Topology - Class D (PWM)
Switching Frequency - 230 kHz
Output Power (Focus) - >450W @ 8 ohms, >800 W @ 4ohms, >1000W @ 2ohms
Minimum Load - 2 ohms

Thanks for looking!

John

 

PM replied!

John

 

Sale is pending.

John