Ampeg SVT3 and Wirerless Problem

[Speckler]

I am wondering if any one else has experienced this issue, I have been trying to run a wireless system and it seems to lose and distort the lower frequencies? I have tried the wireless on my other amps and it works fine. Any one have any Ideas as to what may be causing this? I have the +-15Db set to allow for the added input boost but still somehow I am losing the lower frequency signal quality, Even tried to input thru the preamp input with the same results. Any help would be appreciated

 

[joelb79]

It sounds like your problem is the wireless unit. To verify this try plugging in with a cable.

Which wireless unit are you using?

 

[Speckler]

I am using a Shure Wireless (older unit Ive had for 12 years) It works fine with my Fender BXR and the Ampeg works fine when hard wired? it's got me stumped? I actually tried a new wireless about a month ago as well with the same results so it leads me to beleive it is a problem with the amp?