• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

art tube pac

Bass > TubePac
TubePac XLR > Mixer > FOH
TubePac 1/4 > Bass Amp/monitor

Is the more conventional hook up.

Don't need the TubePac in the circuit as you asked. Both the TubePac and mixer are pre-amps so would be redundant. Going from the TubePac or the mixer to the power amp would be basically the same thing. If you only have one power amp and need to mix it all up, follow conventional hookup and use the TubePac as a DI into the mixer, then mixer to the power amp.

David
 
Bass > TubePac
TubePac XLR > Mixer > FOH
TubePac 1/4 > Bass Amp/monitor

Is the more conventional hook up.

Don't need the TubePac in the circuit as you asked. Both the TubePac and mixer are pre-amps so would be redundant. Going from the TubePac or the mixer to the power amp would be basically the same thing. If you only have one power amp and need to mix it all up, follow conventional hookup and use the TubePac as a DI into the mixer, then mixer to the power amp.

David

I dig. I want to use the compressor as the mixer I have doesn't have one. This is not strictly for bass.
I did look in the manual.
 
Got it,
It can handle - adjust level out at mixer and input of the TubePac to taste within the meters range. Mixers tend to be multiple channel where the tube pac is mono so may just want to pick up a compressor. Alesis 3630 are dual channel and cheap - if you like the TubePac the Pro VLA is a sweet dual channel made by ART.
David
 

Latest posts