Brubaker MM Pickup Wiring

[JMPGuitars]

I didn't see this info ANYWHERE, so I thought I'd share it after testing out the pickups in my Brute MJXSC-4 (I replaced the preamp with a Bartolini preamp).

The color coding is similar to Seymour Duncan:
North:
Black +
White -

South:
Red +
Green -

Same wiring as SD, but in the MJXSC-4 the Green is connected to Hot, and Black is connected to Ground instead. I assume this was done so the south coil would be active when split.

Thanks,
Josh

 

[JMPGuitars]

Side note: the polarity reversal on the bridge pickup could have also been done to avoid phasing issues when combined with the neck pickup. But I wouldn't know, because I didn't bother plugging the bass in with the stock preamp.