• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Carvin BX1200 & Avatar 4-10 NEO 8ohm

After numerous hours spent on this forum and other web-sites, I think I am going with this combination for a new rig. I am going to make one more call tomorrow on my original thought which was the Genz Benz 6.0 Shuttle & GB 2-12 NEOX. I have spent hours trying to get information and finding inventory on the GB gear. I have one promising store left to call. Depending on how much higher the GB gear is will be a factor. I have come to the conclusion that from my experiences over the last two weeks, it might be in GB's best interest to sell direct as Carvin does.
PLEASE > I would appreciate opinions about this rig? :hmm:
 
If possible go with the 4ohm, I mean really get the full potential of the head. My current rig is the BX500 with the Carvin BRX10.4 Neo cab. I still own my BX1200 and have coupled it with the Avatar B410 4ohm neo cab, it's an awesome combination with plenty of what you'll ever need from a bass amp. But seriously, go with the 4 ohm cab, you won't regret it.:smug:
 
If possible go with the 4ohm, I mean really get the full potential of the head. My current rig is the BX500 with the Carvin BRX10.4 Neo cab. I still own my BX1200 and have coupled it with the Avatar B410 4ohm neo cab, it's an awesome combination with plenty of what you'll ever need from a bass amp. But seriously, go with the 4 ohm cab, you won't regret it.:smug:

I"m thinking this way; The BX1200 is 800 watts @ 8ohms bridged which will be plenty I think in almost any situation. Going with the 8 ohm cabinet gives me the ability to add a 2-10,or 4-10,or 2-12 Avatar NEO at 8ohms 8+8 in ohms equals 4ohms. At 4ohms bridged the BX1200 gives you 1200 watts :cool:
 
I"m thinking this way; The BX1200 is 800 watts @ 8ohms bridged which will be plenty I think in almost any situation. Going with the 8 ohm cabinet gives me the ability to add a 2-10,or 4-10,or 2-12 Avatar NEO at 8ohms 8+8 in ohms equals 4ohms. At 4ohms bridged the BX1200 gives you 1200 watts :cool:

Bingo! You won't notice the 1200 W vs 800 W into a single 410 cab. But adding the 2nd cab with more watts would be much more headroom.

Randy
 
I'm a serious fan of Carvin gear, having purchased from them on and off since 1977! :eek:

But honestly, if I had the choice between these two rigs, I'd go for the Genz-Benz rig straightaway. As far as scalability is concerned, the only issue here would be the limited power of the Shuttle. In which case, I'd either save enough to buy a GBE 1200 or a ShuttleMAX 12.0 right off...or I'd plan to sell off the Shuttle after a year or two, then use the proceeds (along with some extra $$) to upgrade to the GBE 1200 or the ShuttleMAX. Along with an additional NEOX-212T... :cool:

MM
 
I"m thinking this way; The BX1200 is 800 watts @ 8ohms bridged which will be plenty I think in almost any situation. Going with the 8 ohm cabinet gives me the ability to add a 2-10,or 4-10,or 2-12 Avatar NEO at 8ohms 8+8 in ohms equals 4ohms. At 4ohms bridged the BX1200 gives you 1200 watts :cool:

I see your point, I was thinking you could get the full 1200 watts at 4ohms with using just one speaker cab - less to move around. I've used the BX1200 with multiple speaker cabs and got tired of all the extra work hauling around extra cabinets.
 
After numerous hours spent on this forum and other web-sites, I think I am going with this combination for a new rig. I am going to make one more call tomorrow on my original thought which was the Genz Benz 6.0 Shuttle & GB 2-12 NEOX. I have spent hours trying to get information and finding inventory on the GB gear. I have one promising store left to call. Depending on how much higher the GB gear is will be a factor. I have come to the conclusion that from my experiences over the last two weeks, it might be in GB's best interest to sell direct as Carvin does.
PLEASE > I would appreciate opinions about this rig? :hmm:

Okay after a phone call to Genz Benz dealer that knew what I was speaking of when I asked about a Shuttle 6.0 and a wealth of other knowledge about their products, that is the way I am going. It's gonna be Genz Benz, just got to decide how I am paying for it.:smug: