• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Club Brimstone

I'm working on a few projects and got myself lots of pedals. So much gear so little time...I've been trying a lot of settings. I haven't found the sweet spot yet but I'm quite impressed by the tonal qualities of the pedal. One of my problems is to find a balance between the "always on" setting I'm looking for and the John Wetton overdrive tone with the boost on (I can get it tonewise but there is too much gain...) Still working on it!!
 
Add me

ImageUploadedByTalkBass1399217142.042299.jpg
 
Thanks Andrew!! Still loving my XD-1. Just got to post some pics of my settings. I'm always amazed, when I see pics, of how differently the settings are from one user to the other. It is, to me, a testimony of the versatility of the unit.

Thanks for taking care of that Andrew! Lots of love around here.

Bellbass, thank you very much and we're thrilled you're enjoying the pedal. I've talked a lot about how to use it and understand it on the main Brimstone thread, but that sucker is almost 40 pages long, so let me say something at the risk of repeating myself.

The pedal is highly interactive, especially when you consider the effect of the X Freq on each distortion channel. Specifically, it controls how much signal hits each distortion preamp, and thus, it greatly effects the saturation of each distortion preamp. In most cases, with bass guitar, you are generating most of your distortion from the high band. If the X Freq is set around 9:00, that's in the lower midrange, which means the high band receives most of the midrange and everything above it. This is enough signal to fully drive the high band distortion in a nice, round, saturated distortion (almost to fuzz with the Boost engaged). I usually refer to this as a more classic distortion sound. If the X Freq is set at or above 12:00, then you are removing significant amounts of midrange from the signal that drives the high band... which leads to a less saturated, more jagged and percussive distortion tone. This is refer to as a modern tone, a la Timmy C from Rage Against the Machine. If you use a pick, or if you slap, the X Freq is a great way to control the attack and percussiveness of the distortion, which is very helpful.

I recommend turning down the low band Gain completely, and just listening to the high band. Then adjust the X Freq and high band Gain to see how they interact.

Have fun!
 
Thanks Dave! I'm having so much fun (but so little time) testing the XD-1, I've settled on a setting that drives my basses to a tone that is really rockin. But I'll make sure to take your advice and check a few of your settings. Thanks again for the time you put here on TB, takin' care of us!!
 

Latest posts