Don't have much experience with anything this complicated. Trying to figure out how to run both the nightbass and svt together, don't know how to connect them. Thank you, and any help is much appreciated!
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Connecting Nightbass to svt pro
- Thread starter HowieVucter
- Start date
-
- Tags
- amp and cab amp head ampeg 410 pro svt
Don't have much experience with anything this complicated. Trying to figure out how to run both the nightbass and svt together, don't know how to connect them. Thank you, and any help is much appreciated!
Do you want to run in mono, dual mono or stereo mode (one or two speaker cabs with same signal or stereo effects).
This would be for stereo, be sure to leave the stereo switch out using two cabs (no bridged mode). Use the white only for mono or mono bridged mode on the Ampeg (one or two cabs).
Or, if you wanted to keep the SVT preamp and EQ in the circuit, you could run the Nightbass in the effects loop (SVT : Effects Loop Send (Mono) [upper right] -> Nightbass : Line Level In - Left (Mono) [upper left] ), then back to the SVT (Nightbass : Main Outputs Line Out - Left / Right [bottom middle] -> SVT : Effects Loop Return - Left / Right [upper right])
I think for mono you'd want to just take the Left Line Out from the Nightbass back to the Right (Mono) Effects Loop Return on the SVT, because it looks like the Nightbass uses Left for Mono and the SVT uses Right...
