The back still has writing from Lonny (Lonny White) who built this bass . You can easily sand that down to get rid of if you like. This is Lonny's 7th build.
On the headstock, it was sanded, smoothed, applied satin finish buffed, satin finish, buffed x5. So the headstock is smooth.
Hardware is all high-end Hipshot, electronics are all Bartolini.
Bartolini - NTMB-918F - 3 band EQ
Bartolini - Hum canceling Jazz Pickup in the neck position
Bartolini - MM style Pickup in the bridge position
Alder body, curly maple top wood, Warmoth neck with Purple Heart Fretboard.
Neck - Wamoth Gecko Wide
Not sure on the weight. I could weigh on bathroom scale but that could be pretty inaccurate.
On the headstock, it was sanded, smoothed, applied satin finish buffed, satin finish, buffed x5. So the headstock is smooth.
Hardware is all high-end Hipshot, electronics are all Bartolini.
Bartolini - NTMB-918F - 3 band EQ
Bartolini - Hum canceling Jazz Pickup in the neck position
Bartolini - MM style Pickup in the bridge position
Alder body, curly maple top wood, Warmoth neck with Purple Heart Fretboard.
Neck - Wamoth Gecko Wide
- 35" scale
- Nut width: 2-3/16" (56 mm)
- Width at 24th fret: 3-1/8" (79 mm)
- String pitch at the bridge: 3/4" (19 mm)
- Straight 14" (356 mm) fret-board radius
- Pre-drilled Neck Mounting Holes
Not sure on the weight. I could weigh on bathroom scale but that could be pretty inaccurate.
