I need help with determining if a capacitor came from the Demeter BEQP-1 preamp that was once installed.
The BEQP-1 was configured and built with the 2-way Mini Toggle Switch for the Mid selection.
When I removed the BEQP-1 from the bass, I found a (markings: 153K) capacitor inside the cavity. I assume it came from the Mid pot, but I can not be certain. I've looked as best as I can to see if there are any indications as the where it was originally soldered, but I came away clueless.
If you have one of these preamps and can provide a photo or guidance as to where and how this capacitor was wired in the preamp, I would be indebted to you.
The BEQP-1 was configured and built with the 2-way Mini Toggle Switch for the Mid selection.
When I removed the BEQP-1 from the bass, I found a (markings: 153K) capacitor inside the cavity. I assume it came from the Mid pot, but I can not be certain. I've looked as best as I can to see if there are any indications as the where it was originally soldered, but I came away clueless.
If you have one of these preamps and can provide a photo or guidance as to where and how this capacitor was wired in the preamp, I would be indebted to you.
