Easy Question

Discussion in 'Luthier's Corner' started by Ampig, Feb 17, 2009.


  1. Ampig

    Ampig Supporting Member

    I'm getting ready to install the electronics in my SX PJ custom project. The pots I bought have the little tab sticking up on the top to lock them in place. Do most people drill a hole through the pickguard for these or clip them off and use starwashers to keep the pots from working loose?
     
  2. ctmullins

    ctmullins fueled by beer and coconut Gold Supporting Member

    Apr 18, 2008
    MS Gulf Coast
    I'm highly opinionated and extremely self-assured
    I never use pickguards, but in the past I've taken a pair of needle-nose pliers and bent the tabs to a 45-degree angle. This lets the pot sit flush against the wood, but still provides a bit of "bite" from the tab.
     
  3. Ampig

    Ampig Supporting Member

    Thanks bro'. Great simple idea.
     
  4. Primary

    Primary TB Assistant

    Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products.

     
    Jun 23, 2021

Share This Page