Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
EBS Micro Bass FX Loop and a Boss Volume/Expression Pedal
- Thread starter Nyarlathotep
- Start date
Anyone? BTW the small block with 2 lines is supposed to be a TRS plug, and the other 2 are supposed to be TS ones. One TS would connect to the tip on the TRS, and the other would connect to the ring of it.
The FV-500H that I'd be using has a mono in, mono out, and stereo EXP jacks.
Im hoping for a definitive answer from the TB effects wizards before I just go out and get the TRS->2xTS adapter and just blindly try it
Im basically trying to keep the cords that are off-board down to a minimum.
The FV-500H that I'd be using has a mono in, mono out, and stereo EXP jacks.
Im hoping for a definitive answer from the TB effects wizards before I just go out and get the TRS->2xTS adapter and just blindly try it
Im basically trying to keep the cords that are off-board down to a minimum.Ok, two issues.
1. the fx loop is parallel and blended, and IME it never gets to 0% or 100% blend.
2. Whether that cable works depends on the specific wiring of the EXP section of that pedal. It might, but I can't be sure. Try it and see. I can think of a few possible reasons why NOT to use this approach though, but again I can't be sure it those issues will be present in this case.
1. the fx loop is parallel and blended, and IME it never gets to 0% or 100% blend.
2. Whether that cable works depends on the specific wiring of the EXP section of that pedal. It might, but I can't be sure. Try it and see. I can think of a few possible reasons why NOT to use this approach though, but again I can't be sure it those issues will be present in this case.
Woah. I forgot about this thread. Anyways I just went with a couple of 6" patch cables I had. Send->In/Out->Return.
Works out better than I figured it would in terms of space and such
Works out better than I figured it would in terms of space and such
