• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

EMG P or Duncan Quarter Pounder?

The time has come to finally trick out my 90's P Bass. I use it tuned a whole step down with a drop C and was wondering if anyone has experience with either of the aforementioned pickups? I've used a QP in the past but that was for a punk rock band...thought it sounded great but have no experience with EMG's. So, can anyone tell me waht they would use for a BIG and HEAVY sound? Think Clutch, COC, Down, ect.

Thanks ya'll!
 
I fitted a QPB-3 to my 90's Fender MIJ P-bass and wasn't that impressed, however, these things are very much in the ear of the beholder and there's no way to be 100% sure until you get the things loaded in there. I would say don't assume the problem with your sound is the pickups. It could just as easily be your amp or other issues with your set-up.
 
I wouldn't put an EMG in there. You have to remove the whole 12 screw pickguard to change the battery. You don't have to change them often but you never know what could happen.
If I were you, I would go with any of the three Dimarzios or a Rio Grande Muy Grande. If you want to spend some money, Delanos are good for a heavy tone.
 
Cool guys, thanks for the input. Its sounding from all the different opinions that it might be a trial and error run to find "the sound". And its not like I'm getting a bad tone out of my stock pickup...its actually quite nice, but I just want MORE of it. I'm running SVTs live and in the studio and just want to slam the front end of the preamp a little more with a hotter signal. Right now I have the stock pickup sunk way into the body...it just didn't sound good close to the strings and I play very aggressive...but by having it so low,
I loose some natural gain...so just wanting more!!!
 

Latest posts