Eminence ES1040E16 4 x 10 custom build

[ShandyBasstard]

I'm building a 4 X 10 cabinet, with some eminence ES1040E16s I have.

I can't find the specs on these things...!? Any ideas?

I'd like to make either 2 x 2 x 10s or a 4 x 10, but need the specs to start the plan.


Pleeaaasse help.

 

[agedhorse]

That’s an OEM model, specs are not generally available.

This makes it tough to design a cabinet around, though with some work and cost of software, you can derive the essential TS parameter yourself.

Do you know what cabinets the driver was originally used in?

 

[ShandyBasstard]

They are new, old stock, I believe they were a replacement for an Eden E410.
I've got in touch with Eminence and they are hopefully going to get me some parameters......!?

 

[ShandyBasstard]

Thanks Horse,

Eminence came through with the params'. Now more research to work out the next step.

I'm assuming winisd is a good place to start.

 

[agedhorse]

WinISD is probably the least accurate software I have seen. By quite a bit actually.

Try BassBox as a starting point.

 

[TontoGB]

Thanks Horse,

Eminence came through with the params'. Now more research to work out the next step.

I'm assuming winisd is a good place to start.

Hi there
Hope you don’t mind my asking, but would you mind sharing the params? I have a couple of these [“new” old stock] I want to build a cabinet around and, like you, can’t find specs anywhere.
Many thanks
Tony

 

[OldogNewTrick]

..Eminence came through with the params'...

I would love to see them too, if only to see in what way they differ from the Eminence CA 1059 driver, which Eminence promotes as an Eden speaker replacement.