Up for sale or trade is my custom Fbass VF5 with some special specs:
34" Scale
-Late 2015 Build
-Northern Ash Body
-East Indian Rosewood Fretboard
-21 frets
-Nitro Lacquer Sunburst Finish
-Weight - 10.13lbs on my new Rapala Fish Scale
-Alleva Coppolo JB5 Single Coil Pick-ups
-70's Bridge Pick-up position
-Bent plate bridge
-F-Bass VF Series Preamp
NOTE: Vol / Vol / Tone + 3 Band Boost Only EQ with switched Active / Passive mode and Tone works in both passive and active modes
-18mm String Spacing at the bridge
-1 and 3/4" Nut Width
NOTE: If you watch my video below, yes the nut width is 1 and 3/4", I was thinking it was 1 and 7/8" while making the video! Doh!
-Vintage Tint neck and headstock
-Custom cut pick guard
-Condition is 8 / 10 - Some minor dings on the butt of the bass, a cymbal ding on the back of the neck which is right around the 6th fret, and some marks near the control cavity and swirling on the pick guard
-Ships with F-Bass Gig bag
TRADE Interests Updated August 26, 2021:
-Large / High Powered 4 ohm Bass Cabinets (Think Bergantino NV412, AccuGroove El Whappo, Audiokinesis Thunderchild, Hathor)
-Bass or mic preamps - i.e. Monique, Noble, Ampeg SVP, Aguilar DB680, UA 6176, etc
-Condenser Microphones for recording (Neumann, AKG, etc)
-Alleva Coppolo Basses (KBP or RA preferred in 4 or 5 strings)
-Vintage Fender Basses (Pre CBS or CBS Era is fine, may look at Custom shops too)
-Olinto Basses (P or J)
-Possibly other 4 or 5 string basses
Price tag is $3000USD with shipping included to the Lower 48 United States or within Canada. Overseas shipping is available at a premium, contact me via private message with your location.
34" Scale
-Late 2015 Build
-Northern Ash Body
-East Indian Rosewood Fretboard
-21 frets
-Nitro Lacquer Sunburst Finish
-Weight - 10.13lbs on my new Rapala Fish Scale
-Alleva Coppolo JB5 Single Coil Pick-ups
-70's Bridge Pick-up position
-Bent plate bridge
-F-Bass VF Series Preamp
NOTE: Vol / Vol / Tone + 3 Band Boost Only EQ with switched Active / Passive mode and Tone works in both passive and active modes
-18mm String Spacing at the bridge
-1 and 3/4" Nut Width
NOTE: If you watch my video below, yes the nut width is 1 and 3/4", I was thinking it was 1 and 7/8" while making the video! Doh!
-Vintage Tint neck and headstock
-Custom cut pick guard
-Condition is 8 / 10 - Some minor dings on the butt of the bass, a cymbal ding on the back of the neck which is right around the 6th fret, and some marks near the control cavity and swirling on the pick guard
-Ships with F-Bass Gig bag
TRADE Interests Updated August 26, 2021:
-Large / High Powered 4 ohm Bass Cabinets (Think Bergantino NV412, AccuGroove El Whappo, Audiokinesis Thunderchild, Hathor)
-Bass or mic preamps - i.e. Monique, Noble, Ampeg SVP, Aguilar DB680, UA 6176, etc
-Condenser Microphones for recording (Neumann, AKG, etc)
-Alleva Coppolo Basses (KBP or RA preferred in 4 or 5 strings)
-Vintage Fender Basses (Pre CBS or CBS Era is fine, may look at Custom shops too)
-Olinto Basses (P or J)
-Possibly other 4 or 5 string basses
Price tag is $3000USD with shipping included to the Lower 48 United States or within Canada. Overseas shipping is available at a premium, contact me via private message with your location.
