I purchased this neck used on here about 5 years ago to replace the neck on my 60's Jazz RI ... the Reggie neck is identical to the necks used (logo, machines, vintage fret wire, etc) on many of the classic/RI's, only with a 9.5" fretboard radius vs. the smaller 7.25" ... the 9.5" was easier on my arthritic hands, and is the radius used on most all modern Fenders, American Standards/etc ... I have since sold the body that I used this neck on, so am letting this go as well ...
I am including a link to the thread that I purchased it from ... the only difference from what is in the pics, the bass arrived to me with long stem vintage reverse machines (tuners) installed, which I actually preferred (do not have the Fender engraved on them) ...
Neck is in good condition, there are a couple minor 'indentations' at the A string bushing, where whoever replaced the machines/bushings must have slightly wedged into the wood to remove the bushing ...
$200 + actual shipping ($15-20), lower 48 only please ... PP is fine ...
Fender Reggie Hamilton Standard Jazz Bass Neck
I am including a link to the thread that I purchased it from ... the only difference from what is in the pics, the bass arrived to me with long stem vintage reverse machines (tuners) installed, which I actually preferred (do not have the Fender engraved on them) ...
Neck is in good condition, there are a couple minor 'indentations' at the A string bushing, where whoever replaced the machines/bushings must have slightly wedged into the wood to remove the bushing ...
$200 + actual shipping ($15-20), lower 48 only please ... PP is fine ...
Fender Reggie Hamilton Standard Jazz Bass Neck