Genz Benz Shuttle 3.0 cabinet power rating

[The Curve]

I'd like to use the existing cabinet from my Genz Benz Shuttle 3.0 10T with a GB Shuttle 6.0 head run into it and another 300 watt cab at 4 ohms (600 watts). Anyone know the power rating of the 10T cabinet? Would this cause a problem?

 

[LyleRyan]

My notes (which may not be correct) say:
STL-10T 16lb 12.5X14X11.75 200W 56-20Khz 8ohm 5Khzcrossover

 

[agedhorse]

My notes (which may not be correct) say:
STL-10T 16lb 12.5X14X11.75 200W 56-20Khz 8ohm 5Khzcrossover

This appears about right. The single 10” driver in a compact cabinet is limited, that’s why the cabinet was designed for the Shuttle 3.0 series.

 

[The Curve]

Thanks for your confirmation.

 

[basscooker]

If you like more mids and dont push the lower end of the EQ, you are kinda ok....

I'm not so confident the STL110 is all that good with potentially 300 watts on tap tho