• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Having issues with Sansamp RBI

justjarge

justjarge

Nov 5, 2019
8
5
#1
Not sure if this is the correct place to post but I recently came into a Tech 21 Sansamp RBI. The unit came without its original power cable and when I plug it in to try to use it there’s a real nasty buzzing noise (I think this I a power issue as I don’t think I have the right power lead) does anyone know / could somebody link me the cable I would need to power this properly? Have added a picture of the power Input for more context:)
 

Attachments

  • 58F4C855-1952-44E1-97FD-14A39AA874F9.jpeg
    58F4C855-1952-44E1-97FD-14A39AA874F9.jpeg
    261.6 KB · Views: 47
#5
I’m using an IEC cable from a projector. The signal chain is Bass > RBI > Amp > Interface > laptop. I have some other IEC cables but was hesitant about trying them as I didn’t want to overpower the unit. Do you think there’s a chance I can break the unit trying the alternative cables?

Thanks again:)
 
#7
justjarge said:
I’m using an IEC cable from a projector. The signal chain is Bass > RBI > Amp > Interface > laptop. I have some other IEC cables but was hesitant about trying them as I didn’t want to overpower the unit. Do you think there’s a chance I can break the unit trying the alternative cables?

Thanks again:)
Click to expand...

Do the IEC cables all have the same style plug that goes into the wall outlet? It would be best to contact our support department for additional help.
 

Latest posts

Top Bottom
Back