Help. Fender tube Pre Biamp set up...

[stanknuckle]

Here's the deal, I have a Fender TBP-1 running into a stereo/bridgable power amp into two separate cabs.
How do I connect this system up to run biamped. The fender has seperate HF and LF outputs. Any help is greatly appreciated.

 

[D.A.R.K.]

make sure the amp is set to stereo.
plug a cable from the lf out of the pre to one side of the amp.
connect a speaker cable to the speaker you want lows to come out of.
plug a cable from the hf out of the pre to the other power amp input.
connect a speaker to that side of the ower amp for highs.
turn it all on, then bring up volumes slowly to make sure it is working correctly.
i suggest setting the x-over(if it is variable) around 100hz.
play around with that until it sounds best to you.

 

[stanknuckle]

Thanks heaps. I'll give it a whirl when I get home from work. I'll report my findings in regards to tone and power after some testing.