I started a project I could not finish (unfortunately not the first time either). It is an Ibanez TMB300 body with a Fender double jazz pickup from an older American Deluxe Precision and a Squier P bass pickup. Preamp is from a TMB 100 and is compatible with the 300 except it has no switch for single coil to humbucking mode for the bridge pickup. There is a chip in the paint near the input jack that is pretty deep and I included a picture of that. None of the electronics are connected or have been tested in any way. I also have neck screws with ferrule inserts. I have a TMB neck that is usable but is a homemade fretless and appears to have had the nut installed backwards. I had the neck on another TMB bass and it worked fine and the nut, much to my amazement was functional although clearly not optimal. I will throw the neck in for an extra $15.00 if someone buys the loaded body and wants it; which would basically cover my shipping costs.
I am willing to part out and prices are as follows (all prices include shipping)
Unloaded body: $65.00
Fender double jazz pickup: $35.00
Squier P pickup: $15.00
TMB: preamp: $20.00
Loaded TMB neck: $35.00
Note: I have not installed any of the electronics so I cannot vouch for their reliability and that is reflected in the price.
I also did not bother taking pictures of the back of the bass because there was nothing to see.
I am willing to part out and prices are as follows (all prices include shipping)
Unloaded body: $65.00
Fender double jazz pickup: $35.00
Squier P pickup: $15.00
TMB: preamp: $20.00
Loaded TMB neck: $35.00
Note: I have not installed any of the electronics so I cannot vouch for their reliability and that is reflected in the price.
I also did not bother taking pictures of the back of the bass because there was nothing to see.
