What would I expect if I combined a Aguilar 4 ohm DB410 cab with a Aguilar 8 ohm GS212 using a DB750 head? Would the 4 ohm cab be alot louder than the 8 ohm cab?
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Mixing cabinet impedence
- Thread starter feelinlow
- Start date
Hi.
While I'm not familiar with either cab nor the head, but mixing cab impedances is usually a bad idea.
In this case however -if the amp can handle the load that is- all the speakers will in theory recieve 1/6 of the power, and equal distribution of power is never a bad thing.
Phase issues aside, it comes down to the sensitivities and power handling capabilities of the said cabs, I'm sure that someone with experience with that setup will chime in
.
Regards
Sam
While I'm not familiar with either cab nor the head, but mixing cab impedances is usually a bad idea.
In this case however -if the amp can handle the load that is- all the speakers will in theory recieve 1/6 of the power, and equal distribution of power is never a bad thing.
Phase issues aside, it comes down to the sensitivities and power handling capabilities of the said cabs, I'm sure that someone with experience with that setup will chime in
.Regards
Sam
