• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Muddy no tone sound from my schecter elite

How can I check to see if the preamp in my guitar is bad

  • Don't know

    Votes: 0 0.0%
  • Uh really don't know

    Votes: 0 0.0%

  • Total voters
    0
  • Poll closed .
Try setting all the controls on the bass to their "neutral" position, if they have one. Plug directly into your amp with a new cable or at least a different one, and see what happens, and if possible plug into a different amp just to make sure it's not the amp. Make sure that your pickup height is correct for those pickups, the correct measurements should be found on Schecter's website or EMG's website, or documentation that came with your bass if you got it new, and also make sure your intonation is correct as well. Does this bass have a 9 volt preamp or an 18 volt preamp? If it has two batteries, make sure both are the same and both are brand new.
 
Not sure, but I think your bass has the same pickups as a Spector Repop I had owned. My observation was that as soon as the strings got a little dull, the tone went to poop and I could not fix it without new strings. I didn't want to change them that often, so off she went. In the back of my mind, I blamed it on the pickups, logical or not. Mine had the Aggie pre. Never had the same problem with single coil basses.