my pedal board plan :D

[Robot Factory]

Hey.........

This may be too little too late, but I just caught wind of this thread......Kevin pretty much nailed the answers though....
(THANKS!)

The 'New' expression interface is wired as Kev's is, and with it being a MUCH nicer feature now, I added it to the stock Wad.

BTW kevin's Wad has almost every mod I have ever done to it (sans boost/cut) I had to break out the shoehorn......

The 'Volume loss' comes from filtering (attenuating/removing) frequencies from the signal. The signal isn't really any 'quieter', but by the time the lows AND highs are removed (BP) a boost is needed to perceive unity gain.......and in LP mode, it isn't an issue.

Let me know if you have other questions.......

-Mario

 

[Doolz]

aah right sweet.

i do have one question, is the Internal Voltage Regulation mod necessary if i plan on using the pedal with the Voodoo Labs Pedal Power 2+?

Thanks.

 

[Robot Factory]

Voodoo Pedal Power is regulated, so you are correct. The regulation isn't totally necessary either way, it will just provide more consistent operation. I doubt most people would hear any difference except in the 'worst case scenario' type situation. The regulation would also allow a wider range of DC supply. Most 'pedal people' won't need this.

-Mario

 

[Robot Factory]

BTW, there is a MeatWad (V.3) listed on Ebay right now.....

Robot Factory Pedal Co. - MeatWad on Ebay

 

[Doolz]

D:
Damnit. i just bought 3 new pedals.

also, just remembered something else. I remember kev talking about a switch on his that allowed him to use all the pedals in the loop with out having the meatwad on. i was wondering if it was possible to adjust the lay out and have that switch as a stomp switch, next to the original switch possibly?

Thanks

 

[Robot Factory]

I could add a second stomp, but not in that box. At least not without losing some features. His is on a flip switch that changes the stomps function. It can be set to do either:

switch between MeatWad with DISABLED FX LOOP
& bypassing MeatWad THROUGH the FX LOOP

OR:

Switch between MeatWad WITH FX LOOP
& True Bypass

With a second stomp (and a relay), you could choose any of the four options above on the fly, but it would cost about $50 or $60 extra, plus you would have to have a larger box OR skip the Expression jack. There just isn't room for all of it.


-Mario

 

[Doolz]

hmmm, well ill probably just go for the toggle then.

Thanks for all your help, ill definately be contacting you in the future to buy the meatwad and the pulsefuzz.