Hello guys... hope this doesn't go against the rules... if it does, please let me know and I'll cancel the topic. I have a pair of Neo humbuckers I made a few years ago for a friend - he changed the spacing at the bridge on that bass... or maybe he sent me the wrong measurements? Can't even remember correctly. Anyway, they have Wengé shells and are of course fully functional, 5 wires each (+ and - for each bobin plus the shielding).
I'm going to give them away for free... you only need to cover shipping or arrange your own carrier pick up. I'll eventually post pictures of them tomorrow and will re-check the spacing as the Neo poles aren't huge, so if your bass has a much wider (or smaller) spacing, they won't work as they should.
I'm in Europe but I don't think shipping worldwide could cost much for such a small package.
I'll also test them again, just to be on the safe side, and will report the output.
So PM if interested.
EDIT: I measured the coils in series, they're around 11k each, 23.7 the bridge one and 23.5 the neck one if wired in series, as you can see.
Checked with the guy, they SHOULD fit a 19mm spacing bass (3/4") so a wide spacing 5.
They're epoxy-potted and oil finished. Please notice that the measurements are in millimeters!
And they're probably gone or going.
I'm going to give them away for free... you only need to cover shipping or arrange your own carrier pick up. I'll eventually post pictures of them tomorrow and will re-check the spacing as the Neo poles aren't huge, so if your bass has a much wider (or smaller) spacing, they won't work as they should.
I'm in Europe but I don't think shipping worldwide could cost much for such a small package.
I'll also test them again, just to be on the safe side, and will report the output.
So PM if interested.
EDIT: I measured the coils in series, they're around 11k each, 23.7 the bridge one and 23.5 the neck one if wired in series, as you can see.
Checked with the guy, they SHOULD fit a 19mm spacing bass (3/4") so a wide spacing 5.
They're epoxy-potted and oil finished. Please notice that the measurements are in millimeters!
And they're probably gone or going.
Attachments
Last edited:
