• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

NAD: 2nd Rumble 100 (and a GAS story)

TL;DR
Got a 2nd Fender Rumble 100 v3 combo. One for home/gigs, one to leave in the rehearsal space. Can daisy chain together in a pinch for a lil 2x12 rig.

The story:
Some may have followed my desire to get a bigger amp here:
What comes first, the amp or the gig?
Basically I wanted something bigger in the event I joined a band with bigger needs. I was looking at a Rumble 500 or similar. But as the GAS crept in, and window shopping became obsessive, it finally hit me: you don't need this. I'm able to use my 100 for 99% of my gigs now, and I'm not looking for another band ATM. the reasoning for getting the 2nd 100c was 2-fold:
1) after a frustrating rehearsal with my 25w ampeg vs. My drummer on the kit, I decided I wanted one for the rehearsal room. Great Rumble tone and no schlep? I'll take it!
2) I figure I can do the daisy chain in the rare case that the 100 alone isnt enough; In 2 years of gigs, only once did I find the 100 wasnt. The idea of a bigger amp spending most of it's time in the closet just wasnt sitting right with me!

So I see it as a win win. I only got to spend a little time testing out the daisy chain, but it is LOUD! I figure if I find myself hauling the 2 combos to gigs on a regular basis, then I can upgrade. But I've got my bases (pun intended) covered now, and let me tell you it's been a real GAS buster!

Now the fun stuff!
20190718_211251.jpg


Got it from GC used online. I called to confirm basic working order. My first rumble was priced higher, but also in better condition. The 2nd was at a great price, but still a few minor issues:
1) the dreaded sticky yellow knobs! Not huge for me, I can change them down the line.
2) fender logo is cracked! Also no biggie, my other logo got snapped off in a load-in, I can just remove this one to match!
3) rubber feet are a bit damaged, 1 chewed up, 1 missing. Anyone ever replace these? Seems like the kinda thing I can get at a hardware store....
https://www.talkbass.com/attachments/20190718_211337-jpg.3481243/ https://www.talkbass.com/attachments/20190718_211300-jpg.3481245/

Thanks for reading!
 
1) the dreaded sticky yellow knobs! Not huge for me, I can change them down the line.
2) fender logo is cracked! Also no biggie, my other logo got snapped off in a load-in, I can just remove this one to match!
3) rubber feet are a bit damaged, 1 chewed up, 1 missing. Anyone ever replace these? Seems like the kinda thing I can get at a hardware store....
Fender might send you that stuff free if you ask nicely!
 
  • Like
Reactions: alanloomis1980
Congrats dude.. Glad u got it all sorted out. Looks great paired up!
I think so too! :thumbsup:

I like that you found a practical solution that works for you. It's refreshing that you can take a step back and not get sucked into the GAS cyclone.
I still think I want a bigger amp eventually, but this takes the pressure off. At least my own self-imposed pressure ;) I can save up, shop around, and take some test drives.


Fender might send you that stuff free if you ask nicely!
Great idea!
 
How does the two fender rumbles sound daisy chained together. Is it loud?
I really liked the sound. Like the 100, but fuller, and punchier. I bet the second amp elevated up has a lot to do with the punch. I used it for a blues trio, never had it past 11:00. So pretty loud, even filled up a small lawn no PA with the rig.

I now run the Markbass CMD 2x12 rig. I’d say the Mark rig is “louder,” only because I can push it harder with more clarity. But the 2x100 rig is a beast- and depending on budget and goals it might be great for you. Considering you can pick up another 100 for 300 new/ 200 used, it’s a very cost-effective setup