new rig! come cut it down

[jake-e]

stingray 5, signal split to

acoustic 450 on two hartke vx410s with low end cut out

and

ampeg svt 3 on an ampeg 410hlf and 410he

 

[bassteban]

No pics, no cuttin' it down.

 

[jake-e]

aren't you fun haha well have it your way

 

[jake-e]

PS. its a rig im looking into getting, i know someone selling an acoustic 450, vx410s are cheap, and i own the other half.

 

[bassteban]

aren't you fun haha well have it your way

Do you mean you're going to post pics? Yay!
BTW, I do think I'm in pretty good form tonight; thanks for the encouragement.
On topic, if by 'come cut it down' you are challenging anyone to tell you what they think of your rig, I quite like it. Sounds like it would be absolutely thunderous. I'd need to hire several undocumented workers to move it, but I'm guessing you're young, so have fun.

Edit: Sorry, I type(& think)slow.

 

[Valerus]

*cuts*

 

[bassteban]

Now we can all sleep.

 

[rodl2005]

Surely the 3PRO cannot be run with BOTH those Ampeg 410's at same time tho- as the HLF is 4 ohms & 3PRO only goes to 4 ohms! BUT the 3PRO on the 410HLF is a great rig! & with a 'ray! ;-)

 

[Nimiety]

Well, it depends... the 410HE is 8ohms, and the 410HLF is 4ohms - both 500 watts RMS, but frequency response is better overall with the HLFs, but we're not talking about dedicated - if he/she is planning on crossing the lows out, then it can be fine (and really, either will sound fine on their own anyways).

 

[Nimiety]

This is, of course, assuming that the initial HLF was a typo - two HE's are fine off the SVT, but only one HLF (and nothing else!) because of the ohmage.
N......

 

[ihixulu]

It sucks. Happy?

 

[Baird6869]

Are you playing a lot of football stadiums these days?

Man, that would be overkill for anything I play.

I use a SVT with a 4x10 and a 1x15 (or 2x12) and that blows heads off even on large outdoor gigs.

Edit: So you are basically playing through 2 8x10's with 2 amp heads?

 

[Stingray_EB]

low end cut out !?

 

[BassSurfer]

Edit: So you are basically playing through 2 8x10's with 2 amp heads?

....lmao!

 

[RickenBoogie]

Surely the 3PRO cannot be run with BOTH those Ampeg 410's at same time tho- as the HLF is 4 ohms & 3PRO only goes to 4 ohms! BUT the 3PRO on the 410HLF is a great rig! & with a 'ray! ;-)

+1, and that's how I read it as well. He's running both cabs with the 3Pro, and shouldn't be.