Pedalboard Questions

[crd]

How are you powering the 2a compressor? Battery also?

Right now I'm just using a wall wart.

A Cioks 4 (version with power adapter not the expansion kit one) would work on the PC-2A with the correct cables. Could also run the FDeck from it. Will be using my Cioks 4 to power an LA-1A that I have coming tomorrow.

PC2A is at 3 minute mark.

I will give that a look.

Thank you everyone for all the options. I will update the thread when I've finally put everything together. I appreciate the help.

 

[klattman]

I was able to stuff a couple warts and a split strip under the small board.
Speaker cable, extension cord and a cable or small wireless+ bass and small cab. Im set up in a couple minutes.

Some kind of spider splinter helps me rotate the warts in place underneath.

Cable Matters 2-Pack 4 Outlet Power Splitter Cord (Power Cord Splitter/Outlet Saver) 1.5 Feet https://a.co/d/0e498wB

 

[crd]

I was able to stuff a couple warts and a split strip under the small board.
Speaker cable, extension cord and a cable or small wireless+ bass and small cab. Im set up in a couple minutes.

Some kind of spider splinter helps me rotate the warts in place underneath.

Cable Matters 2-Pack 4 Outlet Power Splitter Cord (Power Cord Splitter/Outlet Saver) 1.5 Feet https://a.co/d/0e498wB


View attachment 4848416

Any noise issues with the power cord splitter? Looks great.

 

[Loring]

Okay, I guess I need to be more clear.

Does anyone have a suggestion on powering many pieces of equipment that use ice cables on a pedal board in a way that is clean? Just put a power strip under the board.

Forgive my ignorance- what's an ICE cable?

are you talking about IEC connectors?

 

[klattman]

No noise issues unless running too much compression, but I'm also generally running very clean with this setup. (Upright like tone).

 

[crd]

Forgive my ignorance- what's an ICE cable?

are you talking about IEC connectors?

Sorry -- I am not being clear in my terminology due to ignorance. The Sarno Blackbox, Grace Design Felix and power amp (I assume) all use three prong power cords like a computer would use. I was mis calling that an ICE cable (why I have no idea) and I believe I am referring to IEC after a quick google.