Pedaltrain Pro Question

[Bjazzman]

Can i fit 2 power strips as well as the voodoo labs pedal power 2 underneath?

 

[Bjazzman]

or accomidate 4 regular power adapters and 2 one spots as well as the pp2

 

[Zappstorius]

Well it depends on the adapters that you'll be using. I tried to put my power strip under my PT-Pro, but it wouldn't work without the adapters themselves hitting the ground. I'd tie it to the side, but then the board won't fit in the hard case. I'd say it wouldn't fit underneath.

 

[coreyfyfe]

If you mount the power strips underneath and use a few "power strip liberators" you can mount the power supplies off to the side of the strips so everything is flush.

I ordered mine from here: http://www.hometech.com/power/strips.html

The model number was CAM2AF3

TB user "TheMutt" showed a picture of his pedaltrain board that had some of them underneath and he's the one that referred me to that site.


Good luck.

 

[Bjazzman]

is there any other mounting hardware i'd need? and where could i get it?

 

[coreyfyfe]

i mounted everything on mine with zip ties. I had a pedaltrain 2, had the power strip in the middle, and the little space saver things going out to the sides where i had the power supplies and one towards the front to a one spot. the bottom of the board was a big mess of power cables, power supplies, and the cables from the pedals, but the top was perfectly neat and organized and everything sat evenly on the floor.