Poly tune 3 power

[flr82]

My pedalboard power supply can power all but one pedal. Will my sans amp di v2 work ok if I daisy chain from polytune 3 power output? This is just temporary until I get a pedal power with more outputs.

 

[lz4005]

Every time I've tried to power anything off my polytune it has introduced an unacceptable amount of noise to the signal. But you can always try.

If you're using the xlr connection on the sansamp you'd be better off using phantom power. Battery is also a good temporary option. The sansamp lasts quite a while on a 9v. The same can't be said of the polytune.

 

[sunbeast]

Are you using a daisy-chain style power supply like a One-Spot or one with isolated outs like a PP2/etcetera? In either case you should be able to find splitter cables to run multiple pedals off of one of the outlets on your supply. Most likely there are at least two pedals in your chain that play nicely together. I haven’t used the power chain off my Polytune 2, but have found that it can add some noise when daisy-chained with certain other pedals. No harm in trying!

 

[Jek Porkins]

My pedalboard power supply can power all but one pedal. Will my sans amp di v2 work ok if I daisy chain from polytune 3 power output? This is just temporary until I get a pedal power with more outputs.

I have powered pedals with my polytune 2 many times with out issue. Try it out and see if it works. It will only cost a few dollars for the plug in.

 

[flr82]

I am using a pedal power iso 5. I have attached pick of power outs. There are four 9 v outs and an 18 v out. I’m guessing I can’t use 18 v output on 9 v. My chain is a BassBalls envelope filter running on batteries-polytune 3-tc compressor-MXR distortion-MXR Chorus deluxe-Sans Amp di v2 Out to FOH and Amp.

 

[sunbeast]

I am using a pedal power iso 5. I have attached pick of power outs. There are four 9 v outs and an 18 v out. I’m guessing I can’t use 18 v output on 9 v. My chain is a BassBalls envelope filter running on batteries-polytune 3-tc compressor-MXR distortion-MXR Chorus deluxe-Sans Amp di v2 Out to FOH and Amp.

You can get a couple of the output splitters on this page to run two pedals off of a single output of the supply: [Invalid or Expired Link Removed]

 

[flr82]

Can I run two 9v pedals off of the 18v output?

 

[sunbeast]

Can I run two 9v pedals off of the 18v output?

No it doesn’t work that way (“splitting” is just a daisy-chain, so both pedals would be getting 18V in this case).

 

[flr82]

Thanks for the input everyone!!