• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Questions for all bass players

Z

zelth24

Aug 1, 2010
18
0
#1
I had a few questions that I have no clue about
1.what is a string ferrules what does it so and got
2.what does a truss nut do and go
3.jack plates what are those.
4.is there a way to mod a tele bridge so strings dont need to go through the bass
5How often should i replace my nut
6whats a stop tailpiece do
7.does anyone have a fender tele bass neck to put on my p-bass i dont care if its maple or rosewood
*.lastly do they actually make mustang bridge covers with "f" logos on them
 
#2
Answers:
1. I don't know what you mean by ferrules, so I can't answer that one.
2. The truss rod, which is controlled with a nut, allows the neck to be "bowed" in one, possibly two directions. This bow is referred to as relief, and allows you to customize your action and compensate for climate differences for the neck wood.
3. Jack plates are simply the mechanism used to secure a 1/4" jack in place.
4. No idea, no experience with those or thru-body stringing in general.
5. Shouldn't need to too often if at all, depending on quality and strings used. That's not something you should worry about.
6. A stoptail bridge is a 2 unit system where one unit holds the strings, and another does the job of a saddle, like a Tune-O-Matic
7. Nope, and that sort of request belongs in the wtb (where to buy) forums
8. No idea, but this one doesn't have one: Invalid Link Removed
 
#3
zelth24 said:
1.what is a string ferrules what does it [d]o and got
Click to expand...
They are guides that go in the string-through body holes that are usually made of metal that are used on string-through body instruments. They keep the strings from completely going through the body, or snapping out at you when they are tuned up to pitch.

zelth24 said:
4.is there a way to mod a tele bridge so strings dont need to go through the bass
Click to expand...
You can replace the bridge with an aftermarket bridge that will do this.

zelth24 said:
7.does anyone have a fender tele bass neck to put on my p-bass i dont care if its maple or rosewood
Click to expand...
You should post that you are looking for one in the want to buy forums. You can also purchase one from Warmoth.
 
#6
First of all you could have Googled every one of these things and actually gotten the answers you seek.
1.what is a string ferrules what does it so and got
Click to expand...
It is a metal or plastic piece that the strings are channeled through and are held by for through body stringing.
2.what does a truss nut do and go
Click to expand...
Allow you to adjust the reverse tension of the truss rod that counters the string tension, this adjust the bow of the neck allowing for higher or lower action.
3.jack plates what are those.
Click to expand...
Covers the area around the input jack.
4.is there a way to mod a tele bridge so strings dont need to go through the bass
Click to expand...
get a different bridge.
5How often should i replace my nut
Click to expand...
I generally don't talk to guys about their nuts.

Only when it wears out, in other words not anytime soon.
6whats a stop tailpiece do
Click to expand...
That is generally a guitar bridge, but a few bass manufacturers such as Warwick use them. It is a two piece bridge.
7.does anyone have a fender tele bass neck to put on my p-bass i dont care if its maple or rosewood
Click to expand...
Buy a Warmoth or Mighty Mite and put a Fender decal on it, problem solved.
*.lastly do they actually make mustang bridge covers with "f" logos on them
Click to expand...
Not that I have ever seen.
 
#7
Apropos replacing your bass nut:

Replace it if it breaks or cracks--usually due to replacing strings with a gauge too wide for the existing nut slots. Even a small discrepancy CAN sometimes crack the bone or plastic, rendering that string unplayable.

Also, you may wish to replace the nut if you switch to a smaller gauge string, although existing nut slots can be widened if you have the right tools, skill, and knowledge about width and depth.
 
#8
Aspidites said:
First of all you could have Googled every one of these things and actually gotten the answers you seek.

It is a metal or plastic piece that the strings are channeled through and are held by for through body stringing.

Allow you to adjust the reverse tension of the truss rod that counters the string tension, this adjust the bow of the neck allowing for higher or lower action.

Covers the area around the input jack.

get a different bridge.

I generally don't talk to guys about their nuts.

Only when it wears out, in other words not anytime soon.

That is generally a guitar bridge, but a few bass manufacturers such as Warwick use them. It is a two piece bridge.

Buy a Warmoth or Mighty Mite and put a Fender decal on it, problem solved.

Not that I have ever seen.
Click to expand...

Where do you get a fender decal at to put on one i would get a mighty mite if i can find the fender p-bass logo
 

Latest posts

Top Bottom
Back