Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Sansamp Control question!
- Thread starter JoshSmith
- Start date
Here is a link to the manual. Invalid Link Removed
Basically the switch that corresponds to the 1/4 output has settings for instrument level which is best when going to a bass amp and line level which is better for using directly to a power amp or a mixers line input.
The switches that correspond to the XLR are for using phantom power or lifting the ground to eliminate ground hum. The other switch provides a -20dB pad (instrument level) and line level.
Basically the switch that corresponds to the 1/4 output has settings for instrument level which is best when going to a bass amp and line level which is better for using directly to a power amp or a mixers line input.
The switches that correspond to the XLR are for using phantom power or lifting the ground to eliminate ground hum. The other switch provides a -20dB pad (instrument level) and line level.
